AirTAC HLQL20x20S – Precision Pneumatic Air Slide Table Cylinder Bore 20 × Stroke 20mm
Looking for a medium-force, high-rigidity pneumatic air slide table cylinder with precision anti-rotation linear guidance and a 20mm stroke? The AirTAC HLQL20x20S belongs to the HLQL slide table series by AirTAC. It features a 20mm bore, 20mm stroke, double-acting operation, and a standard integrated magnet (S).
Key Features of AirTAC HLQL20x20S
✅ High-precision pneumatic air slide table with integrated linear guideway (HLQL series).
✅ Bore: 20 mm (dual-piston architecture delivers strong, balanced linear thrust).
✅ Stroke: 20 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Monolithic aluminum slide table paired with a low-play linear guide resists off-center loads, bending moments, and angular rotation.
✅ Multiple mounting faces with precision dowel holes simplify direct payload and frame attachment.
✅ Integrated body sensor slots and dual rubber bumpers ensure quiet, lubrication-free operation.

Technical Specifications
✅ Model: HLQL20x20S (HLQL20X20S / equivalent to HLQ20x20S)
✅ Series: HLQL (Linear Guide Air Slide Table Cylinder)
✅ Bore: 20 mm
✅ Stroke: 20 mm
✅ Action: Double acting
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure range: 0.15 – 0.7 MPa (22 ~ 100 psi)
✅ Proof pressure: 1.05 MPa (150 psi)
✅ Piston speed: 50 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5 × 0.8
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Medium-payload precision pushing, clamping, press-fitting, and pick-and-place modules
✅ Electronics assembly, PCB handling, semiconductor, automated medical devices, and optical inspection (AOI) stages
✅ High-speed packaging, labeling, date-coding, and component sorting cells
✅ Direct-load linear stages mounted on robotic arms and automated assembly lines
Why Choose the AirTAC HLQL20x20S?
The AirTAC HLQL20x20S integrates dual-piston pneumatic actuation and linear guidance into one rigid unit, reducing mechanical design complexity. Strong 20mm-bore thrust, high repeatability, and built-in magnetic sensor grooves ensure dependable performance.
Selection & Installation Tips
✅ Confirm 20mm bore, 20mm stroke, HLQL slide table profile, and magnetic piston (S) match your mechanical layout.
✅ Verify that applied payload weight and moment loads stay within HLQL20 catalog ratings at a 20mm stroke.
✅ Supply clean compressed air filtered to 40μm or finer and install speed controllers on both M5×0.8 ports for smooth table travel.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the integrated body slots for stroke-end sensing.
Hotline: 0084 787900099