AirTAC MBL32x350SU – Aluminum Mini Round Pneumatic Cylinder Bore 32 × Stroke 350mm
Looking for a lightweight 32mm bore aluminum mini round pneumatic cylinder with a long 350mm stroke, built-in magnetic sensing, and a space-saving flat rear cap? The AirTAC MBL32x350SU (MBL32X350SU) belongs to the MBL series by AirTAC. It features a 32mm bore, 350mm stroke, double-acting operation, an integrated magnet (S), and a flat-end back cover (U).
Key Features of AirTAC MBL32x350SU
✅ Lightweight aluminum alloy mini round pneumatic cylinder (MBL series – Double Acting).
✅ Bore: 32 mm (delivers strong linear thrust in a compact round housing).
✅ Stroke: 350 mm (extended travel reach for long-distance actuation).
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Flat-end back cover (U suffix) shortens overall actuator length across the 350mm stroke when rear pivot mounting is not needed.
✅ Anodized aluminum barrel and end covers minimize moving mass on robotic arms and high-speed conveyors.
✅ Built-in rubber bumpers at both ends absorb impact noise and ensure smooth, lubrication-free operation.

Technical Specifications
✅ Model: MBL32x350SU (MBL32X350SU)
✅ Series: MBL (Aluminum Alloy Mini Round Cylinder)
✅ Bore: 32 mm
✅ Stroke: 350 mm
✅ Rod diameter: 12 mm (M10×1.25 rod thread)
✅ Action: Double acting
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Back cover type: Flat-end type (U)
✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 800 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/8"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ 350mm-stroke product pushing, sorting diverters, lifting stages, and sliding gate actuation on automated conveyors
✅ Packaging, labeling, filling, food processing, and converting lines
✅ Electronics assembly, textile, printing, and automated equipment requiring magnetic stroke-end verification
✅ Length-constrained machine frames utilizing the compact U flat-end rear cover
Why Choose the AirTAC MBL32x350SU?
The AirTAC MBL32x350SU provides a featherweight, economical long-stroke 350mm actuation solution combining a space-saving U flat rear cap with a standard magnetic piston (S). Its anodized aluminum construction and quiet dual rubber bumpers ensure low-maintenance reliability.
Selection & Installation Tips
✅ Confirm 32mm bore, 350mm stroke, magnetic piston (S), flat-end cap (U), and M10×1.25 rod thread match your mechanical setup.
✅ Supply clean compressed air filtered to 40μm or finer and avoid radial side loads on the 12mm piston rod across the 350mm stroke.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series with BMA32 mounting band) onto the aluminum barrel.
✅ Pair with compatible 32mm round cylinder mounting brackets (front flange FA or foot bracket LB) and install speed controllers on both PT 1/8" ports.
Hotline: 0084 787900099