Our News & Events

Home / News
AirTAC TCM12x50S – Three-Shaft Guided Pneumatic Cylinder Slide Bearing Bore 12mm Stroke 50mm Genuine

AirTAC TCM12x50S – Three-Shaft Guided Pneumatic Cylinder Slide Bearing Bore 12mm Stroke 50mm Genuine

Events, Article & Sharing      20/11/2026

AirTAC TCM12x50S – Three-Shaft Guided Pneumatic Cylinder Bore 12 × Stroke 50mm

Looking for a compact 12mm bore three-shaft guided pneumatic cylinder with a 50mm stroke engineered to withstand lateral side loads and prevent rod rotation? The AirTAC TCM12x50S belongs to the TCM guided cylinder series by AirTAC (dimensionally equivalent to SMC MGPM12-50Z). It features a 12mm bore, 50mm stroke, double-acting operation, wear-resistant bronze slide bearings, and a standard integrated magnet (S).

Key Features of AirTAC TCM12x50S

✅ Three-shaft guided pneumatic cylinder with rigid front tooling plate (TCM series – equivalent to SMC MGPM12-50Z).

✅ Bore: 12 mm (compact footprint tailored for precision automation assemblies).

✅ Stroke: 50 mm.

✅ Action: Double acting.

✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.

✅ Dual 8mm guide shafts running in precision bronze slide bearings provide high resistance to off-center loads, bending moments, and angular rotation across the 50mm stroke.

✅ Multiple mounting faces (top, bottom, and rear) with precision dowel pin holes enable versatile multi-axis installation.

✅ Dual-end rubber bumpers absorb end-of-stroke impact and require no additional air line lubrication.

Technical Specifications

✅ Model: TCM12x50S (TCM12X50S)

✅ Series: TCM (Three-Shaft Guided Cylinder – Slide Bearing Type)

✅ Bore: 12 mm

✅ Stroke: 50 mm

✅ Main piston rod diameter: 6 mm

✅ Guide shaft diameter: 8 mm (bronze slide bearing)

✅ Action: Double acting

✅ Cushioning: Rubber bumper pads at both ends

✅ Magnet: Yes (S – standard)

✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)

✅ Proof pressure: 1.5 MPa (215 psi)

✅ Piston speed: 30 – 500 mm/s

✅ Operating temperature: -20°C ~ +70°C

✅ Port size: M5 × 0.8 (top and rear piping ports available)

✅ Fluid: Air (filtered by 40μm filter element)

Typical Applications

✅ Miniature conveyor stopper mechanisms, small-part lifting stages, and sorting diverters over a 50mm stroke

✅ Electronics assembly, PCB handling, semiconductor, medical device, and optical instrumentation lines

✅ Packaging, labeling, date-coding, and compact press-fitting jigs subjected to lateral side loads

✅ Direct drop-in dimensional and functional replacement for SMC MGPM12-50Z three-shaft cylinders

Why Choose the AirTAC TCM12x50S?

The AirTAC TCM12x50S combines compact pneumatic actuation and twin bronze-bushed guide shafts inside a single monolithic aluminum body, preventing rod deflection and rotation under side loads. Multi-face mounting options and standard magnetic sensor slots simplify machine integration.

Selection & Installation Tips

✅ Confirm 12mm bore, 50mm stroke, bronze slide bearings (TCM), and magnetic piston (S) match your side-load requirements (select AirTAC TCL12x50S if ball-bushing guidance for higher speeds is preferred).

✅ Verify that applied lateral loads and bending moments stay within TCM12 catalog ratings at a 50mm stroke.

✅ Supply clean compressed air filtered to 40μm or finer and install speed controllers on both M5×0.8 ports for smooth travel.

✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the integrated body slots for stroke-end sensing.

Hotline: 0084 787900099

Social Share

Related Posts

hotline
Working hours: 9:00 - 18:00 (Excluding Saturday and Sunday)
©T Solution industry Vietnam Co., LTD2026. Login