AirTAC TN25x40S – Twin-Rod Anti-Rotation Pneumatic Cylinder Bore 25 × Stroke 40mm
Looking for a compact 25mm bore twin-rod pneumatic cylinder with a 40mm stroke that doubles linear output thrust while providing built-in anti-rotation guidance? The AirTAC TN25x40S (TN25X40S) belongs to the TN twin-rod cylinder series by AirTAC (dimensionally equivalent to SMC CXSM25-40). It features a 25mm bore, 40mm stroke, double-acting operation, and a standard integrated magnet (S).
Key Features of AirTAC TN25x40S
✅ Twin-rod anti-rotation pneumatic cylinder with rigid front mounting plate (TN series – equivalent to SMC CXSM25-40).
✅ Bore: 25 mm × dual pistons (delivers twice the pushing and pulling force of a single-piston 25mm bore cylinder).
✅ Stroke: 40 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Dual parallel 12mm piston rods coupled to a common front plate eliminate angular rotation and improve lateral load resistance throughout the 40mm stroke.
✅ Extruded aluminum housing offers multiple mounting faces (top, bottom, side, and front) plus flush sensor mounting slots.
✅ Dual-end rubber bumpers absorb end-of-stroke impact and require no additional air line lubrication.

Technical Specifications
✅ Model: TN25x40S (TN25X40S)
✅ Series: TN (Twin-Rod Anti-Rotation Pneumatic Cylinder)
✅ Bore: 25 mm (dual parallel pistons)
✅ Stroke: 40 mm
✅ Rod diameter: 12 mm × 2 rods
✅ Action: Double acting
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure range: 0.1 – 0.9 MPa (14 ~ 130 psi)
✅ Proof pressure: 1.35 MPa (195 psi)
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/8" (side and rear piping options)
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ High-thrust pushing, lifting, press-fitting, and conveyor diverting mechanisms in slim machine envelopes
✅ Packaging, filling, labeling, electronics assembly, and general factory automation lines
✅ Mechanical clamping and positioning jigs requiring non-rotating tooling plates
✅ Direct drop-in dimensional and functional replacement for SMC CXSM25-40 twin-rod cylinders
Why Choose the AirTAC TN25x40S?
The AirTAC TN25x40S doubles linear thrust using twin 25mm pistons while inherently preventing rod rotation without bulky external guide bars. Multi-face mounting holes, flexible port locations, and standard magnetic sensor slots make installation straightforward.
Selection & Installation Tips
✅ Confirm 25mm bore, 40mm stroke, twin-rod configuration (TN), and magnetic piston (S) match your mechanical layout.
✅ Supply clean compressed air filtered to 40μm or finer and install speed controllers on both PT 1/8" ports for smooth motion.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the integrated body slots for stroke-end sensing.
✅ Center payloads evenly on the front tooling plate to maximize twin-rod bushing service life.
Hotline: 0084 787900099