AirTAC MAC20x75SCAG – Aluminum Anti-Rotation Mini Round Cylinder Bore 20 × Stroke 75mm
Looking for a lightweight 20mm bore aluminum mini round pneumatic cylinder with a 75mm stroke combining magnetic sensing, a rear single-clevis pivot, and internal rod anti-rotation? The AirTAC MAC20x75SCAG belongs to the MAC aluminum mini cylinder series by AirTAC. It features a 20mm bore, 75mm stroke, double-acting operation, an integrated magnet (S), a rear single-clevis cap (CA), and a non-rotating piston rod (G).
Key Features of AirTAC MAC20x75SCAG
✅ Lightweight multi-feature aluminum mini round pneumatic cylinder (MAC series – Double Acting).
✅ Bore: 20 mm.
✅ Stroke: 75 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Rear single-clevis end cap with pivot hole (CA suffix) enables smooth angular oscillation along arcuate linkages.
✅ Integrated non-rotating mechanism (G suffix) keeps the piston rod aligned without angular rotation throughout the 75mm stroke.
✅ Anodized aluminum barrel and end covers minimize moving mass, while dual-end rubber bumpers ensure quiet, lubrication-free operation.

Technical Specifications
✅ Model: MAC20x75SCAG (MAC20X75SCAG)
✅ Series: MAC (Aluminum Mini Round Cylinder – Multi-Feature)
✅ Bore: 20 mm
✅ Stroke: 75 mm
✅ Rod diameter: 8 mm (M8×1.25 rod thread)
✅ Action: Double acting
✅ Special feature: Non-rotating piston rod (G suffix)
✅ Back cover type: Single clevis with pivot hole (CA)
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure range: 0.15 – 0.8 MPa (22 ~ 115 psi)
✅ Proof pressure: 1.2 MPa (175 psi)
✅ Piston speed: 30 – 800 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5 × 0.8
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ 75mm-stroke conveyor diverter gates, pivoting rocker-arm linkages, and lifting stages requiring strict angular alignment
✅ High-speed packaging, filling, labeling, food, and converting machinery
✅ Electronics assembly, textile, printing, and automated equipment utilizing magnetic stroke-end sensing
✅ Lightweight end-of-arm tooling on industrial robots and pick-and-place gantries
Why Choose the AirTAC MAC20x75SCAG?
The AirTAC MAC20x75SCAG integrates three high-value features—magnetic sensing (S), rear clevis pivoting (CA), and rod anti-rotation (G)—inside a featherweight anodized aluminum body. It eliminates external anti-rotation guides while reducing moving inertia.
Selection & Installation Tips
✅ Confirm 20mm bore, 75mm stroke, magnetic piston (S), rear clevis (CA), non-rotating rod (G), and M8×1.25 rod thread match your mechanical setup.
✅ Supply clean compressed air filtered to 40μm or finer and avoid radial side loads on the 8mm piston rod.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series with BMA20 mounting band) onto the aluminum barrel.
✅ Fit a properly sized pivot pin through the rear CA clevis eye and install speed controllers on both M5×0.8 ports for smooth travel.
Hotline: 0084 787900099