AirTAC SDA50x15S – Compact Square Pneumatic Cylinder Bore 50 × Stroke 15mm
Looking for a high-force 50mm bore compact square pneumatic cylinder with a short 15mm stroke and built-in magnetic sensing for automated position feedback? The AirTAC SDA50x15S belongs to the standard SDA compact cylinder series by AirTAC. It features a 50mm bore, 15mm stroke, double-acting operation, and a standard integrated magnet (S).
Key Features of AirTAC SDA50x15S
✅ High-thrust compact square pneumatic cylinder (SDA series – Double Acting).
✅ Bore: 50 mm (generates strong pressing and clamping force within a low-profile square footprint).
✅ Stroke: 15 mm (short, rigid travel).
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Piston rod end: Standard female thread M16×1.5 (select B suffix if a male-threaded rod end is required).
✅ Tie-rodless extruded aluminum alloy body features through-body mounting holes, flush sensor grooves, and a self-lubricating rod bearing.
✅ Dual-end rubber bumpers ensure smooth, quiet, lubrication-free operation.

Technical Specifications
✅ Model: SDA50x15S (SDA50X15S)
✅ Series: SDA (Compact Square Cylinder – Double Acting)
✅ Bore: 50 mm
✅ Stroke: 15 mm
✅ Rod diameter: 20 mm
✅ Rod end type: Female thread M16×1.5 (standard)
✅ Action: Double acting
✅ Cushioning: NBR rubber bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/4"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Short-stroke (15mm) heavy workpiece clamping, press-fitting, stamping, and conveyor stopping mechanisms
✅ Carton packaging, industrial filling, food, and beverage production lines
✅ Automated welding jigs, machining fixtures, and automotive or electronics assembly stations
✅ Space-restricted machinery requiring high 50mm-bore force and magnetic stroke-end verification
Why Choose the AirTAC SDA50x15S?
The AirTAC SDA50x15S packs strong 50mm-bore linear force into an ultra-slim 15mm-stroke square body. Through-body mounting holes, high-flow PT 1/4" ports, and a standard magnetic piston ensure effortless integration and dependable performance.
Selection & Installation Tips
✅ Confirm 50mm bore, 15mm stroke, magnetic piston (S), and M16×1.5 female rod thread match your clamping or pressing fixture.
✅ Supply clean compressed air filtered to 40μm or finer with adequate flow capacity for the PT 1/4" ports.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the integrated barrel slots.
✅ Avoid radial side loads on the 20mm piston rod to maximize seal longevity.
Hotline: 0084 787900099