Our News & Events

Home / News
AirTAC RMS25x600 – Magnetically Coupled Guided Rodless Pneumatic Cylinder Bore 25mm Stroke 600mm Genuine

AirTAC RMS25x600 – Magnetically Coupled Guided Rodless Pneumatic Cylinder Bore 25mm Stroke 600mm Genuine

Events, Article & Sharing      20/11/2026

AirTAC RMS25x600 – Magnetically Coupled Guided Rodless Pneumatic Cylinder Bore 25 × Stroke 600mm

Looking for a long-stroke 25mm bore guided rodless pneumatic cylinder with a 600mm travel that cuts installation length in half while offering zero air leakage and rigid load support? The AirTAC RMS25x600 belongs to the RMS guided rodless cylinder series by AirTAC. It features a 25mm bore, 600mm stroke, double-acting operation, integrated linear guidance, and a standard magnet (S).

Key Features of AirTAC RMS25x600

✅ Magnetically coupled rodless pneumatic cylinder with integrated linear guide (RMS series).

✅ Bore: 25 mm.

✅ Stroke: 600 mm (long linear stroke inside an installation envelope roughly half that of a standard rodded cylinder).

✅ Action: Double acting.

✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.

✅ Permanent-magnet coupling between the internal stainless-barrel piston and external carriage isolates the air chamber completely—eliminating seal leakage and rod buckling across the 600mm span.

✅ Integrated precision linear guide rail parallel to the cylinder tube supports direct payloads, resists bending moments, and prevents rotation.

✅ Built-in end-cap bumpers smoothly cushion carriage deceleration at stroke limits.

Technical Specifications

✅ Model: RMS25x600 (RMS25X600)

✅ Series: RMS (Magnetically Coupled Rodless Cylinder with Guide)

✅ Bore: 25 mm

✅ Stroke: 600 mm

✅ Action: Double acting

✅ Guidance system: Integrated linear guide rail for direct payload mounting

✅ Cushioning: End-cap bumper pads

✅ Magnet: Yes (S – standard)

✅ Operating pressure range: 0.15 – 0.7 MPa (22 ~ 100 psi)

✅ Proof pressure: 1.05 MPa (150 psi)

✅ Piston speed: 50 – 500 mm/s

✅ Operating temperature: -10°C ~ +60°C

✅ Port size: PT 1/8" (located on end caps)

✅ Fluid: Air (filtered by 40μm filter element)

Typical Applications

✅ 600mm-stroke product transfer, sorting diverters, part feeding, and packaging in length-constrained machine frames

✅ Screen printing, automated spray painting, material cutting, electronics assembly, and medical device equipment

✅ Direct-mount shuttle carriages carrying tooling without external guide rails

✅ Functional replacement for 25mm bore magnetically coupled guided rodless actuators

Why Choose the AirTAC RMS25x600?

The AirTAC RMS25x600 solves long-stroke 600mm automation challenges in tight machine footprints by eliminating extending piston rods. Its hermetically sealed magnetic drive and rigid linear guide deliver smooth, sag-free travel and long service life.

Selection & Installation Tips

✅ Confirm 25mm bore, 600mm stroke, and guided linear rail design (RMS) match your payload and moment limits (keep inertial forces within maximum magnetic coupling holding force to prevent decoupling).

✅ Mount both end caps onto a flat, rigid machine surface to maintain linear rail alignment across the 600mm length.

✅ Supply clean compressed air filtered to 40μm or finer and install speed controllers on both PT 1/8" ports for smooth carriage deceleration.

✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the body slots for carriage position feedback.

Hotline: 0084 787900099

Social Share

Related Posts

hotline
Working hours: 9:00 - 18:00 (Excluding Saturday and Sunday)
©T Solution industry Vietnam Co., LTD2026. Login