AirTAC MI20x80SCAG – ISO6432 Stainless Steel Anti-Rotation Mini Round Cylinder Bore 20 × Stroke 80mm
Looking for an ISO6432 standard 20mm bore stainless steel mini round pneumatic cylinder with an 80mm stroke combining magnetic sensing, a rear single-clevis pivot, and internal rod anti-rotation? The AirTAC MI20x80SCAG belongs to the MI series by AirTAC. It features a 20mm bore, 80mm stroke, double-acting operation, an integrated magnet (S), a rear single-clevis cap (CA), and a non-rotating piston rod (G).
Key Features of AirTAC MI20x80SCAG
✅ ISO6432 international standard multi-feature stainless steel mini round pneumatic cylinder (MI series).
✅ Bore: 20 mm.
✅ Stroke: 80 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Rear single-clevis end cap with pivot hole (CA suffix) enables smooth angular oscillation along arcuate linkages.
✅ Integrated non-rotating mechanism (G suffix) keeps the piston rod aligned without angular rotation throughout the 80mm stroke.
✅ Corrosion-resistant SUS304 stainless steel barrel and dual-end rubber bumpers ensure smooth, lubrication-free operation.

Technical Specifications
✅ Model: MI20x80SCAG (MI20X80SCAG)
✅ Series: MI (ISO6432 Stainless Steel Mini Round Cylinder)
✅ Bore: 20 mm
✅ Stroke: 80 mm
✅ Rod diameter: 8 mm (M8×1.25 rod thread)
✅ Action: Double acting
✅ Special feature: Non-rotating piston rod (G suffix)
✅ Back cover type: Single clevis with pivot hole (CA)
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 800 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/8"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ 80mm-stroke conveyor diverter gates, pivoting rocker-arm linkages, and lifting stages requiring strict angular alignment
✅ Packaging, filling, food, beverage, and pharmaceutical machinery requiring a clean SUS304 stainless steel barrel
✅ Electronics assembly, textile, printing, and automated equipment utilizing magnetic stroke-end sensing
✅ ISO6432 standardized replacement for 20mm bore anti-rotation clevis round cylinders
Why Choose the AirTAC MI20x80SCAG?
The AirTAC MI20x80SCAG combines three high-value features—magnetic sensing (S), rear clevis pivoting (CA), and rod anti-rotation (G)—inside an ISO6432 SUS304 stainless steel housing. It reduces external guide complexity while delivering durable, corrosion-resistant performance.
Selection & Installation Tips
✅ Confirm 20mm bore, 80mm stroke, magnetic piston (S), rear clevis (CA), non-rotating rod (G), and M8×1.25 rod thread match your mechanical setup.
✅ Supply clean compressed air filtered to 40μm or finer and avoid radial side loads on the 8mm piston rod.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series with BMA20 mounting band) onto the stainless steel barrel.
✅ Fit a properly sized pivot pin through the rear CA clevis eye and install speed controllers on both PT 1/8" ports for smooth travel.
Hotline: 0084 787900099