Our News & Events

Home / News
AirTAC MF25x30SCAT – Stainless Steel Mini Round Pneumatic Cylinder With Magnet & Clevis Bore 25mm Stroke 30mm Genuine

AirTAC MF25x30SCAT – Stainless Steel Mini Round Pneumatic Cylinder With Magnet & Clevis Bore 25mm Stroke 30mm Genuine

Events, Article & Sharing      20/11/2026

AirTAC MF25x30SCAT – Stainless Steel Mini Round Pneumatic Cylinder Bore 25 × Stroke 30mm

Looking for a corrosion-resistant 25mm bore stainless steel mini round pneumatic cylinder with a 30mm stroke, built-in magnetic sensing, and a rear single-clevis pivot cap? The AirTAC MF25x30SCAT (MF25X30SCAT) belongs to the MF stainless steel mini cylinder series by AirTAC. It features a 25mm bore, 30mm stroke, double-acting operation, an integrated magnet (S), a rear single-clevis cap (CA), and metric thread specification (T).

Key Features of AirTAC MF25x30SCAT

✅ Corrosion-resistant SUS304 stainless steel mini round pneumatic cylinder (MF series – Double Acting).

✅ Bore: 25 mm (delivers dependable pushing and pulling thrust in a compact round housing).

✅ Stroke: 30 mm.

✅ Action: Double acting.

✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.

✅ Rear single-clevis end cap with pivot hole (CA suffix) allows smooth angular oscillation during extension and retraction.

✅ Metric specification (T suffix) paired with a SUS304 barrel resists moisture and washdown environments.

✅ Built-in rubber bumpers at both ends absorb impact noise and require no additional air line lubrication.

Technical Specifications

✅ Model: MF25x30SCAT (MF25X30SCAT)

✅ Series: MF (Stainless Steel Mini Round Cylinder)

✅ Bore: 25 mm

✅ Stroke: 30 mm

✅ Rod diameter: 10 mm (M10×1.25 rod thread)

✅ Action: Double acting

✅ Cushioning: Rubber bumper pads at both ends

✅ Magnet: Yes (S – standard)

✅ Back cover type: Single clevis with pivot hole (CA)

✅ Thread standard: Metric specification (T suffix)

✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)

✅ Proof pressure: 1.5 MPa (215 psi)

✅ Piston speed: 30 – 800 mm/s

✅ Operating temperature: -20°C ~ +70°C

✅ Port size: PT 1/8" or M5×0.8 (per standard MF25 configuration)

✅ Fluid: Air (filtered by 40μm filter element)

Typical Applications

✅ Pivoting lid lifters, conveyor diverter gates, and rocker-arm mechanisms utilizing the rear CA clevis mount

✅ Packaging, filling, food, beverage, and pharmaceutical lines requiring a clean SUS304 stainless steel barrel

✅ Electronics assembly, textile, printing, and automated equipment requiring magnetic position feedback

✅ Direct replacement for 25mm bore × 30mm stroke stainless steel round cylinders on metric machinery

Why Choose the AirTAC MF25x30SCAT?

The AirTAC MF25x30SCAT combines a durable SUS304 stainless steel barrel, an articulated CA clevis rear pivot, and built-in magnetic sensing (S). Quiet dual rubber bumpers and lubrication-free operation ensure reliable, low-maintenance performance.

Selection & Installation Tips

✅ Confirm 25mm bore, 30mm stroke, magnetic piston (S), rear clevis cap (CA), and M10×1.25 metric rod thread match your mechanical linkage.

✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.

✅ Mount compatible magnetic sensors (such as CMSG or DMSG series with BMA25 mounting band) onto the stainless steel barrel.

✅ Fit a properly sized pivot pin through the rear CA clevis eye and install speed controllers on both ports for smooth speed control.

Hotline: 0084 787900099

Social Share

Related Posts

hotline
Working hours: 9:00 - 18:00 (Excluding Saturday and Sunday)
©T Solution industry Vietnam Co., LTD2026. Login