Our News & Events

Home / News
AirTAC MBL25x25SCA – Aluminum Mini Round Pneumatic Cylinder With Magnet & Clevis Bore 25mm Stroke 25mm Genuine

AirTAC MBL25x25SCA – Aluminum Mini Round Pneumatic Cylinder With Magnet & Clevis Bore 25mm Stroke 25mm Genuine

Events, Article & Sharing      20/11/2026

AirTAC MBL25x25SCA – Aluminum Mini Round Pneumatic Cylinder Bore 25 × Stroke 25mm

Looking for a lightweight 25mm bore aluminum mini round pneumatic cylinder with a 25mm stroke, built-in magnetic sensing, and a rear single-clevis pivot cap for angular motion linkages? The AirTAC MBL25x25SCA (MBL25X25SCA) belongs to the MBL series by AirTAC. It features a 25mm bore, 25mm stroke, double-acting operation, an integrated magnet (S), and a rear single-clevis cap with pivot pin hole (CA).

Key Features of AirTAC MBL25x25SCA

✅ Lightweight aluminum alloy mini round pneumatic cylinder (MBL series – Double Acting).

✅ Bore: 25 mm (delivers strong linear thrust in a compact round profile).

✅ Stroke: 25 mm.

✅ Action: Double acting.

✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.

✅ Rear single-clevis end cap with pivot hole (CA suffix) allows smooth angular oscillation during extension and retraction.

✅ Anodized aluminum barrel and end covers minimize moving mass on robotic arms and high-speed mechanisms.

✅ Built-in rubber bumpers at both ends absorb impact noise and ensure smooth, lubrication-free operation.

Technical Specifications

✅ Model: MBL25x25SCA (MBL25X25SCA)

✅ Series: MBL (Aluminum Alloy Mini Round Cylinder)

✅ Bore: 25 mm

✅ Stroke: 25 mm

✅ Rod diameter: 10 mm (M10×1.25 rod thread)

✅ Action: Double acting

✅ Cushioning: Rubber bumper pads at both ends

✅ Magnet: Yes (S – standard)

✅ Back cover type: Single clevis with pivot hole (CA)

✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)

✅ Proof pressure: 1.5 MPa (215 psi)

✅ Piston speed: 30 – 800 mm/s

✅ Operating temperature: -20°C ~ +70°C

✅ Port size: PT 1/8"

✅ Fluid: Air (filtered by 40μm filter element)

Typical Applications

✅ Pivoting lid lifters, conveyor diverter gates, and rocker-arm mechanisms utilizing the rear CA clevis mount

✅ Packaging, labeling, filling, and sorting machinery for small-to-medium products

✅ Electronics assembly, textile, printing, and lightweight automated equipment requiring magnetic position feedback

✅ Industrial mechanisms requiring arcuate oscillation between fixed pivot points

Why Choose the AirTAC MBL25x25SCA?

The AirTAC MBL25x25SCA provides a lightweight, economical actuation solution combining an integrated CA clevis rear pivot with a standard magnetic piston (S). Its anodized aluminum construction, quiet dual rubber bumpers, and lubrication-free design keep installation simple and maintenance low.

Selection & Installation Tips

✅ Confirm 25mm bore, 25mm stroke, magnetic piston (S), rear clevis cap (CA), and M10×1.25 rod thread match your mechanical linkage.

✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.

✅ Mount compatible magnetic sensors (such as CMSG or DMSG series with BMA25 mounting band) onto the aluminum barrel for stroke-end sensing.

✅ Fit a properly sized pivot pin through the rear CA clevis eye and install speed controllers on both PT 1/8" ports for smooth speed control.

Hotline: 0084 787900099

Social Share

Related Posts

hotline
Working hours: 9:00 - 18:00 (Excluding Saturday and Sunday)
©T Solution industry Vietnam Co., LTD2026. Login