Our News & Events

Home / News
AirTAC SE63x220 – Tie-Rodless Standard Pneumatic Cylinder Bore 63mm Stroke 220mm Genuine

AirTAC SE63x220 – Tie-Rodless Standard Pneumatic Cylinder Bore 63mm Stroke 220mm Genuine

Events, Article & Sharing      19/11/2026

AirTAC SE63x220 – Tie-Rodless Standard Pneumatic Cylinder Bore 63 × Stroke 220mm

Looking for a heavy-duty 63mm bore standard pneumatic cylinder with a 220mm stroke, a sleek tie-rodless aluminum barrel for easy cleaning, and adjustable air cushioning? The AirTAC SE63x220 (SE63X220) belongs to the SE series by AirTAC. It features a 63mm bore, 220mm stroke, double-acting operation, and a non-magnetic piston.

Key Features of AirTAC SE63x220

✅ Tie-rodless standard square-cover pneumatic cylinder (SE series).

✅ Bore: 63 mm (delivers high pushing and pulling thrust for heavy industrial payloads).

✅ Stroke: 220 mm.

✅ Action: Double acting.

✅ Non-magnetic piston (standard version; choose AirTAC SE63x220S if magnetic sensor mounting is needed).

✅ Dual-end adjustable air cushions smoothly decelerate heavy moving loads at the end of the 220mm stroke.

✅ Smooth extruded aluminum barrel eliminates exposed external tie rods, preventing dust accumulation and simplifying washdown.

✅ End-cover mounting dimensions are fully compatible with standard AirTAC SC63 mounting brackets (FA, FB, LB, CA, CB).

Technical Specifications

✅ Model: SE63x220 (SE63X220)

✅ Series: SE (Standard Tie-Rodless Square-Cover Cylinder)

✅ Bore: 63 mm

✅ Stroke: 220 mm

✅ Rod diameter: 20 mm (M16×1.5 rod thread)

✅ Action: Double acting

✅ Cushioning: Adjustable air cushion at both ends

✅ Magnet: No (select S suffix for magnetic piston)

✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)

✅ Proof pressure: 1.5 MPa (215 psi)

✅ Piston speed: 30 – 800 mm/s

✅ Operating temperature: -20°C ~ +70°C

✅ Port size: PT 3/8"

✅ Fluid: Air (filtered by 40μm filter element)

Typical Applications

✅ 220mm-stroke heavy pushing, lifting, pressing, and sorting mechanisms on automated industrial conveyors

✅ Carton packaging, filling, food, beverage, and pharmaceutical machinery requiring clean, smooth-walled cylinder barrels

✅ Woodworking, textile, printing, building materials, and heavy workpiece clamping fixtures

✅ Aesthetic drop-in upgrade for standard 63mm bore × 220mm stroke pneumatic cylinders

Why Choose the AirTAC SE63x220?

The AirTAC SE63x220 combines the high thrust of a 63mm bore with a clean, tie-rodless housing that resists dirt buildup. Tunable dual air cushions and full mounting compatibility with SC63 accessories simplify installation and long-term maintenance.

Selection & Installation Tips

✅ Confirm 63mm bore, 220mm stroke, and M16×1.5 rod thread match your mechanical linkage.

✅ Note that SE63x220 is non-magnetic; select AirTAC SE63x220S if magnetic position sensing is required.

✅ Supply clean compressed air filtered to 40μm or finer with adequate flow capacity for the PT 3/8" ports.

✅ Fine-tune the cushion needle screws on both end caps alongside speed controllers on the PT 3/8" ports for smooth stopping.

Hotline: 0084 787900099

Social Share

Related Posts

hotline
Working hours: 9:00 - 18:00 (Excluding Saturday and Sunday)
©T Solution industry Vietnam Co., LTD2026. Login