AirTAC SC100x40S – Standard Tie-Rod Pneumatic Cylinder Bore 100 × Stroke 40mm
Looking for a heavy-duty 100mm bore standard tie-rod pneumatic cylinder with a short, high-force 40mm stroke, built-in magnetic sensing, and adjustable air cushioning? The AirTAC SC100x40S belongs to the standard SC series by AirTAC. It features a 100mm bore, 40mm stroke, double-acting operation, and a standard integrated magnet (S).
Key Features of AirTAC SC100x40S
✅ Heavy-duty four-tie-rod standard pneumatic cylinder (SC series – Double Acting).
✅ Bore: 100 mm (generates substantial linear pressing and clamping force at standard shop air pressure).
✅ Stroke: 40 mm (compact, rigid travel for high-thrust short-stroke operations).
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Dual-end adjustable air cushions smoothly decelerate heavy loads and protect machine frames from impact shock.
✅ Thick-walled hard-anodized aluminum barrel and a rugged 25mm hard-chrome-plated piston rod ensure lubrication-free longevity.

Technical Specifications
✅ Model: SC100x40S (SC100X40S)
✅ Series: SC (Standard Tie-Rod Pneumatic Cylinder)
✅ Bore: 100 mm
✅ Stroke: 40 mm
✅ Rod diameter: 25 mm (M20×1.5 rod thread)
✅ Action: Double acting
✅ Cushioning: Adjustable air cushion at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 800 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/2"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Pneumatic presses, forming dies, balers, heat-sealing stations, and heavy-duty workpiece clamping jigs
✅ Large carton packaging, industrial filling, brick/tile manufacturing, woodworking, and metallurgy lines
✅ Short-stroke (40mm) heavy lifting and holding mechanisms requiring magnetic stroke-end verification
✅ Compatible with heavy-duty SC100 mounting hardware including F-SC100FA/FB flanges, LB foot mounts, and CA/CB clevises
Why Choose the AirTAC SC100x40S?
The AirTAC SC100x40S delivers immense 100mm-bore thrust within a compact 40mm stroke. High-flow PT 1/2" ports, a standard magnetic piston, and tunable dual air cushions ensure powerful, controlled, and durable operation.
Selection & Installation Tips
✅ Confirm 100mm bore, 40mm stroke, magnetic piston (S), and M20×1.5 rod thread match your pressing or clamping fixture.
✅ Supply clean compressed air filtered to 40μm or finer with adequate flow capacity for the PT 1/2" ports.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series with BSC100 mounting bracket) onto a cylinder tie rod.
✅ Fine-tune the cushion needle screws on both end caps according to payload mass for smooth deceleration.
Hotline: 0084 787900099