AirTAC ACQ20x25 – JIS Standard Compact Square Pneumatic Cylinder Bore 20 × Stroke 25mm
Looking for an ultra-slim JIS standard compact square pneumatic cylinder with a 20mm bore, 25mm stroke, and direct through-body mounting holes? The AirTAC ACQ20x25 (ACQ20X25) belongs to the standard ACQ series by AirTAC (dimensionally equivalent to SMC CQ2). It features a 20mm bore, 25mm stroke, double-acting operation, and a non-magnetic piston.
Key Features of AirTAC ACQ20x25
✅ JIS standard compact square pneumatic cylinder (ACQ series – drop-in dimensional match for SMC CQ2B20-25D).
✅ Bore: 20 mm.
✅ Stroke: 25 mm.
✅ Action: Double acting.
✅ Non-magnetic piston (standard version; choose AirTAC ACQ20x25S if magnetic sensor mounting is needed).
✅ Piston rod end: Standard female thread M5×0.8 (select B suffix if a male-threaded rod end M8×1.25 is required).
✅ Tie-rodless extruded aluminum body features through-body mounting holes and a self-lubricating rod bearing.
✅ Built-in rubber bumpers at both ends absorb impact noise and require no additional air line lubrication.

Technical Specifications
✅ Model: ACQ20x25 (ACQ20X25)
✅ Series: ACQ (JIS Standard Compact Cylinder – Double Acting)
✅ Bore: 20 mm
✅ Stroke: 25 mm
✅ Rod diameter: 10 mm
✅ Rod end type: Female thread M5×0.8 (standard)
✅ Action: Double acting
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: No (select S suffix for magnetic piston)
✅ Operating pressure range: 0.1 – 1.0 MPa (14 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5 × 0.8
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ 25mm-stroke part pushing, stopping, clamping, and press-fitting in space-restricted automation cells
✅ Electronics, PCB handling, semiconductor, optical, and automated medical device assembly
✅ High-speed packaging, labeling, filling, and conveyor sorting equipment
✅ Direct dimensional replacement for JIS compact cylinders such as SMC CQ2B20-25D
Why Choose the AirTAC ACQ20x25?
The AirTAC ACQ20x25 delivers JIS standardized mounting interchangeability in a lightweight, space-saving square housing. Its dual rubber bumpers and lubrication-free bearing ensure smooth, quiet, and cost-effective operation.
Selection & Installation Tips
✅ Confirm 20mm bore, 25mm stroke, and standard M5×0.8 female rod thread (or select AirTAC ACQ20x25B for a male M8×1.25 rod thread).
✅ Note that ACQ20x25 is non-magnetic; select AirTAC ACQ20x25S if magnetic position detection is required.
✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.
✅ Use M5×0.8 fittings equipped with sealing washers and avoid applying radial side loads to the 10mm piston rod.
Hotline: 0084 787900099