AirTAC ACQ63x25G – Anti-Rotation Compact Square Pneumatic Cylinder Bore 63 × Stroke 25mm
Looking for a heavy-duty 63mm bore JIS standard compact square pneumatic cylinder with a 25mm stroke and integrated piston rod anti-rotation? The AirTAC ACQ63x25G belongs to the ACQ series by AirTAC. It features a 63mm bore, 25mm stroke, double-acting operation, a non-magnetic piston, and an internal non-rotating rod mechanism (G).
Key Features of AirTAC ACQ63x25G
✅ JIS standard compact square pneumatic cylinder with anti-rotation rod (ACQ series – equivalent to SMC CQ2K).
✅ Bore: 63 mm (generates strong pressing and clamping force in a space-saving square profile).
✅ Stroke: 25 mm.
✅ Action: Double acting.
✅ Non-magnetic piston (standard version; select AirTAC ACQ63x25SG if magnetic sensor mounting is needed).
✅ Integrated non-rotating mechanism (G suffix) keeps the piston rod aligned without angular twist across the 25mm stroke.
✅ Heavy-duty M16×1.5 female rod thread and dual rubber bumpers ensure quiet, lubrication-free operation.

Technical Specifications
✅ Model: ACQ63x25G (ACQ63X25G)
✅ Series: ACQ (JIS Standard Compact Cylinder – Anti-Rotation)
✅ Bore: 63 mm
✅ Stroke: 25 mm
✅ Rod diameter: 20 mm
✅ Rod end type: Female thread M16×1.5 (standard)
✅ Action: Double acting
✅ Special feature: Non-rotating piston rod (G suffix)
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: No (select S suffix for magnetic piston)
✅ Operating pressure range: 0.1 – 1.0 MPa (14 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/4"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ High-force pressing, stamping, and workpiece clamping over a 25mm stroke requiring strict angular alignment
✅ Carton packaging, filling, food, beverage, and automotive component manufacturing lines
✅ Automated welding jigs, precision machining fixtures, and industrial assembly stations
✅ Depth-restricted machinery requiring high output thrust from a 63mm bore without external anti-rotation guides
Why Choose the AirTAC ACQ63x25G?
The AirTAC ACQ63x25G combines high 63mm-bore thrust with built-in G anti-rotation accuracy inside a slim JIS standardized body. Eliminating external anti-rotation hardware reduces fixture size, weight, and engineering cost.
Selection & Installation Tips
✅ Confirm 63mm bore, 25mm stroke, non-rotating rod (G), and M16×1.5 female rod thread match your mechanical setup.
✅ Note that ACQ63x25G is non-magnetic; select AirTAC ACQ63x25SG if magnetic position sensing is required.
✅ Supply clean compressed air filtered to 40μm or finer with adequate flow capacity for the PT 1/4" ports.
✅ Avoid radial side loads on the piston rod to preserve long-term anti-rotation accuracy.
Hotline: 0084 787900099