AirTAC HLQL12x20SB – Precision Pneumatic Air Slide Table Cylinder Bore 12 × Stroke 20mm
Looking for an ultra-compact, high-rigidity pneumatic air slide table cylinder with precision anti-rotation linear guidance and side piping ports? The AirTAC HLQL12x20SB belongs to the HLQL slide table series by AirTAC. It features a 12mm bore, 20mm stroke, double-acting operation, an integrated magnet (S), and side-mounted air ports (B).
Key Features of AirTAC HLQL12x20SB
✅ High-precision pneumatic air slide table with integrated linear guideway (HLQL series).
✅ Bore: 12 mm (dual-piston architecture delivers balanced thrust in a low-profile housing).
✅ Stroke: 20 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Side-mounted air ports (B suffix) save axial space and simplify tubing routing when mounted flush against machine frames.
✅ Monolithic slide table combined with a low-play linear guide resists off-center moment loads and eliminates angular rotation.
✅ Integrated body sensor slots and stroke-adjusting stoppers streamline commissioning.

Technical Specifications
✅ Model: HLQL12x20SB (HLQL12X20SB)
✅ Series: HLQL (Linear Guide Air Slide Table Cylinder)
✅ Bore: 12 mm
✅ Stroke: 20 mm
✅ Action: Double acting
✅ Piping port location: Side ports (B suffix)
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure range: 0.15 – 0.7 MPa (22 ~ 100 psi)
✅ Proof pressure: 1.05 MPa (150 psi)
✅ Piston speed: 50 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5 × 0.8
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Precision pushing, clamping, pressing, and pick-and-place modules in electronics and semiconductor assembly
✅ PCB handling, automated medical devices, optical instruments, and automated optical inspection (AOI) stages
✅ High-speed miniature packaging, labeling, date-coding, and component sorting cells
✅ Space-constrained automation stations requiring direct payload mounting and side air ports (B)
Why Choose the AirTAC HLQL12x20SB?
The AirTAC HLQL12x20SB integrates pneumatic actuation and linear guidance into a single ultra-slim unit, reducing mechanical design complexity. Its side-port layout (B) and standard magnetic sensor slots deliver neat tubing management and high repeatability.
Selection & Installation Tips
✅ Confirm 12mm bore, 20mm stroke, magnetic piston (S), and side piping ports (B) match your machine envelope.
✅ Verify that applied payload weight and moment loads stay within HLQL12 catalog ratings.
✅ Supply clean compressed air filtered to 40μm or finer and install speed controllers on both M5×0.8 ports for smooth table travel.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the integrated body slots for stroke-end sensing.
Hotline: 0084 787900099