AirTAC SC40x300S – Standard Tie-Rod Pneumatic Cylinder Bore 40 × Stroke 300mm
Looking for a reliable 40mm bore standard tie-rod pneumatic cylinder with a 300mm long stroke, built-in magnetic sensing, and adjustable air cushioning? The AirTAC SC40x300S belongs to the standard SC series by AirTAC. It features a 40mm bore, 300mm stroke, double-acting operation, and a standard integrated magnet (S).
Key Features of AirTAC SC40x300S
✅ Standard four-tie-rod pneumatic cylinder (SC series – Double Acting).
✅ Bore: 40 mm (provides reliable linear force for general industrial automation).
✅ Stroke: 300 mm (extended travel reach).
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Dual-end adjustable air cushions smoothly decelerate loads at the end of the 300mm stroke, reducing mechanical vibration.
✅ Hard-anodized aluminum alloy barrel and self-lubricating rod bearing provide long, lubrication-free service life.
✅ Compatible with all standard SC40 mounting accessories including FA/FB flanges, LB foot mounts, and CA/CB clevises.

Technical Specifications
✅ Model: SC40x300S (SC40X300S)
✅ Series: SC (Standard Tie-Rod Pneumatic Cylinder)
✅ Bore: 40 mm
✅ Stroke: 300 mm
✅ Rod diameter: 16 mm (M12×1.25 rod thread)
✅ Action: Double acting
✅ Cushioning: Adjustable air cushion at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 800 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/4"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ 300mm-stroke pushing, lifting, positioning, and sorting mechanisms on automated conveyors
✅ Carton packaging, filling, food, beverage, and converting machinery
✅ Woodworking, textile, printing, building materials, and industrial clamping fixtures
✅ Automated lines requiring accurate magnetic stroke-end sensing over a 300mm stroke
Why Choose the AirTAC SC40x300S?
The AirTAC SC40x300S offers an economical, durable, and widely supported actuation solution for 300mm stroke requirements. Its built-in magnetic piston and tunable dual air cushions ensure smooth, repeatable performance across millions of cycles.
Selection & Installation Tips
✅ Confirm 40mm bore, 300mm stroke, magnetic piston (S), and M12×1.25 rod thread match your mechanical linkage.
✅ Supply clean compressed air filtered to 40μm or finer and avoid radial side loads across the 300mm stroke.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series with BSC40 mounting bracket) onto a cylinder tie rod.
✅ Fine-tune the cushion needle screws on both end caps alongside speed controllers on the PT 1/4" ports for smooth deceleration.
Hotline: 0084 787900099