Our News & Events

Home / News
AirTAC MBL20x50CA – Aluminum Mini Round Pneumatic Cylinder With Clevis Bore 20mm Stroke 50mm Genuine

AirTAC MBL20x50CA – Aluminum Mini Round Pneumatic Cylinder With Clevis Bore 20mm Stroke 50mm Genuine

Events, Article & Sharing      19/11/2026

AirTAC MBL20x50CA – Aluminum Mini Round Pneumatic Cylinder Bore 20 × Stroke 50mm

Looking for a lightweight 20mm bore aluminum mini round pneumatic cylinder with a 50mm stroke and a rear single-clevis pivot cap for angular motion linkages? The AirTAC MBL20x50CA (MBL20X50CA) belongs to the MBL series by AirTAC. It features a 20mm bore, 50mm stroke, double-acting operation, a non-magnetic piston, and a rear single-clevis cap with pivot pin hole (CA).

Key Features of AirTAC MBL20x50CA

✅ Lightweight aluminum alloy mini round pneumatic cylinder (MBL series – Double Acting).

✅ Bore: 20 mm.

✅ Stroke: 50 mm.

✅ Action: Double acting.

✅ Non-magnetic piston (standard version; choose AirTAC MBL20x50SCA if magnetic sensor mounting is needed).

✅ Rear single-clevis end cap with pivot hole (CA suffix) allows smooth angular oscillation during extension and retraction.

✅ Anodized aluminum barrel and end covers minimize moving mass on robotic arms and high-speed mechanisms.

✅ Built-in rubber bumpers at both ends absorb impact noise and ensure smooth, lubrication-free operation.

Technical Specifications

✅ Model: MBL20x50CA (MBL20X50CA)

✅ Series: MBL (Aluminum Alloy Mini Round Cylinder)

✅ Bore: 20 mm

✅ Stroke: 50 mm

✅ Rod diameter: 8 mm (M8×1.25 rod thread)

✅ Action: Double acting

✅ Cushioning: Rubber bumper pads at both ends

✅ Magnet: No (select S suffix for magnetic piston)

✅ Back cover type: Single clevis with pivot hole (CA)

✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)

✅ Proof pressure: 1.5 MPa (215 psi)

✅ Piston speed: 30 – 800 mm/s

✅ Operating temperature: -20°C ~ +70°C

✅ Port size: PT 1/8"

✅ Fluid: Air (filtered by 40μm filter element)

Typical Applications

✅ Pivoting lid lifters, conveyor diverter gates, and rocker-arm mechanisms utilizing the rear CA clevis mount

✅ Packaging, labeling, filling, and sorting machinery for small-to-medium products

✅ Electronics assembly, textile, printing, and lightweight automated equipment

✅ Industrial mechanisms requiring arcuate oscillation between fixed pivot points

Why Choose the AirTAC MBL20x50CA?

The AirTAC MBL20x50CA provides a lightweight, economical actuation solution with an integrated CA clevis rear pivot. Its anodized aluminum construction, quiet dual rubber bumpers, and lubrication-free design keep installation simple and maintenance low.

Selection & Installation Tips

✅ Confirm 20mm bore, 50mm stroke, rear clevis cap (CA), and M8×1.25 rod thread match your mechanical linkage.

✅ Note that MBL20x50CA is non-magnetic; select AirTAC MBL20x50SCA if magnetic position sensing is required.

✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.

✅ Fit a properly sized pivot pin through the rear CA clevis eye and install speed controllers on both PT 1/8" ports for smooth speed control.

Hotline: 0084 787900099

Social Share

Related Posts

hotline
Working hours: 9:00 - 18:00 (Excluding Saturday and Sunday)
©T Solution industry Vietnam Co., LTD2026. Login