AirTAC SC50x200S – Standard Tie-Rod Pneumatic Cylinder Bore 50 × Stroke 200mm
Looking for a reliable 50mm bore standard tie-rod pneumatic cylinder with a 200mm stroke, built-in magnetic sensing, and adjustable air cushioning? The AirTAC SC50x200S belongs to the industry-benchmark SC series by AirTAC. It features a 50mm bore, 200mm stroke, double-acting operation, and a standard integrated magnet (S).
Key Features of AirTAC SC50x200S
✅ Industry-standard four-tie-rod pneumatic cylinder (SC series – Double Acting).
✅ Bore: 50 mm (delivers strong pushing and pulling force for medium-to-heavy industrial loads).
✅ Stroke: 200 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Dual-end adjustable air cushions smoothly decelerate loads at the end of the 200mm stroke, protecting machinery from impact shock.
✅ Hard-anodized aluminum alloy barrel and self-lubricating rod bearing provide long, lubrication-free service life.
✅ Compatible with a wide selection of standard SC50 mounting brackets including FA/FB flanges, LB foot mounts, and CA/CB clevises.

Technical Specifications
✅ Model: SC50x200S (SC50X200S)
✅ Series: SC (Standard Tie-Rod Pneumatic Cylinder)
✅ Bore: 50 mm
✅ Stroke: 200 mm
✅ Rod diameter: 20 mm (M16×1.5 rod thread)
✅ Action: Double acting
✅ Cushioning: Adjustable air cushion at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 800 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/4"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ 200mm-stroke pushing, lifting, pressing, and sorting mechanisms on automated conveyors
✅ Carton packaging, filling, food, beverage, and converting machinery
✅ Woodworking, textile, printing, building materials, and industrial clamping fixtures
✅ Automated lines requiring accurate magnetic stroke-end sensing
Why Choose the AirTAC SC50x200S?
The AirTAC SC50x200S is an industrial staple known for rugged construction, strong 50mm-bore thrust, and universal mounting accessories. Its built-in magnetic piston and tunable dual air cushions ensure smooth, repeatable operation across millions of cycles.
Selection & Installation Tips
✅ Confirm 50mm bore, 200mm stroke, magnetic piston (S), and M16×1.5 rod thread match your mechanical linkage.
✅ Supply clean compressed air filtered to 40μm or finer and avoid radial side loads on the 20mm piston rod.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series with BSC50 mounting bracket) onto a cylinder tie rod.
✅ Fine-tune the cushion needle screws on both end caps alongside speed controllers on the PT 1/4" ports for smooth deceleration.
Hotline: 0084 787900099