AirTAC SC63x80SG – Anti-Rotation Standard Pneumatic Cylinder Bore 63 × Stroke 80mm
Looking for a heavy-duty 63mm bore standard tie-rod pneumatic cylinder with an 80mm stroke, built-in magnetic sensing, and internal rod anti-rotation guidance? The AirTAC SC63x80SG belongs to the standard SC series by AirTAC. It features a 63mm bore, 80mm stroke, double-acting operation, an integrated magnet (S), and an internal anti-rotation guide mechanism (SG).
Key Features of AirTAC SC63x80SG
✅ Standard tie-rod pneumatic cylinder with built-in anti-rotation guide (SC series).
✅ Bore: 63 mm (generates high pushing and pulling thrust for heavy payloads).
✅ Stroke: 80 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Integrated anti-rotation guide mechanism (SG) keeps the piston rod aligned without angular rotation throughout the 80mm stroke.
✅ Dual-end adjustable air cushions smoothly decelerate loads and prevent end-of-stroke shock.
✅ Rugged four-tie-rod construction with an anodized aluminum barrel ensures lubrication-free longevity.

Technical Specifications
✅ Model: SC63x80SG (SC63X80SG)
✅ Series: SC (Standard Tie-Rod Cylinder – Anti-Rotation Guide)
✅ Bore: 63 mm
✅ Stroke: 80 mm
✅ Rod diameter: 20 mm (M16×1.5 rod thread)
✅ Action: Double acting
✅ Special feature: Integrated anti-rotation guide (SG)
✅ Cushioning: Adjustable air cushion at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 3/8"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ 80mm-stroke pressing, lifting, pushing, and heavy sorting mechanisms requiring strict angular alignment
✅ Carton packaging, filling, food, beverage, and converting machinery
✅ Woodworking, textile, printing, and heavy industrial workpiece positioning fixtures
✅ Automated lines requiring magnetic stroke-end sensing
Why Choose the AirTAC SC63x80SG?
The AirTAC SC63x80SG combines the high thrust of a 63mm bore with a dedicated SG anti-rotation mechanism, eliminating angular drift without bulky external guide rods. Dual adjustable air cushions, a standard magnetic piston, and full SC63 accessory compatibility ensure reliable operation.
Selection & Installation Tips
✅ Confirm 63mm bore, 80mm stroke, magnetic piston (S), anti-rotation guide (SG), and M16×1.5 rod thread match your mechanical setup.
✅ Supply clean compressed air filtered to 40μm or finer with adequate flow capacity for the PT 3/8" ports.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series with BSC63 mounting bracket) onto a cylinder tie rod.
✅ Fine-tune the cushion needle screws on both end caps alongside speed controllers on the PT 3/8" ports for smooth stopping.
Hotline: 0084 787900099