AirTAC SDA25x20S – Compact Square Pneumatic Cylinder Bore 25 × Stroke 20mm
Looking for an ultra-slim compact square pneumatic cylinder with a 25mm bore, 20mm stroke, and built-in magnetic sensing for automated position feedback? The AirTAC SDA25x20S (SDA25X20S) belongs to the standard SDA compact cylinder series by AirTAC. It features a 25mm bore, 20mm stroke, double-acting operation, and a standard integrated magnet (S).
Key Features of AirTAC SDA25x20S
✅ Space-saving compact square pneumatic cylinder (SDA series – Double Acting).
✅ Bore: 25 mm (delivers dependable pushing force in a compact square housing).
✅ Stroke: 20 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Piston rod end: Standard female thread M8×1.25 (select B suffix if a male-threaded rod end is required).
✅ Tie-rodless extruded aluminum alloy body includes flush sensor mounting grooves and a self-lubricating rod bearing.
✅ Dual-end rubber bumpers ensure smooth, quiet, lubrication-free operation.

Technical Specifications
✅ Model: SDA25x20S (SDA25X20S)
✅ Series: SDA (Compact Square Cylinder – Double Acting)
✅ Bore: 25 mm
✅ Stroke: 20 mm
✅ Rod diameter: 10 mm
✅ Rod end type: Female thread M8×1.25 (standard)
✅ Action: Double acting
✅ Cushioning: NBR rubber bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/8"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ 20mm-stroke workpiece clamping, stopping, press-fitting, and part pushing mechanisms
✅ Electronics, PCB handling, semiconductor, and automated medical device assembly lines
✅ Packaging, labeling, filling, and conveyor sorting stations with tight space envelopes
✅ Compact mechanical jigs requiring magnetic stroke-end verification
Why Choose the AirTAC SDA25x20S?
The AirTAC SDA25x20S maximizes space efficiency with its compact square profile and direct through-body mounting holes. Equipped with a standard magnetic piston, quiet rubber bumpers, and a self-lubricating rod bushing, it provides reliable, low-maintenance performance.
Selection & Installation Tips
✅ Confirm 25mm bore, 20mm stroke, magnetic piston (S), and M8×1.25 female rod thread match your mechanical setup.
✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the integrated barrel slots.
✅ Use PT 1/8" pneumatic fittings for the air ports and avoid radial side loads on the 10mm piston rod.
Hotline: 0084 787900099