Our News & Events

Home / News
AirTAC HFZ25 – Parallel Pneumatic Air Gripper Bore 25mm Genuine

AirTAC HFZ25 – Parallel Pneumatic Air Gripper Bore 25mm Genuine

Events, Article & Sharing      19/11/2026

AirTAC HFZ25 – Parallel Pneumatic Air Gripper Bore 25mm

Looking for a high-force parallel pneumatic air gripper with rigid linear-guide jaw stability and ±0.01mm repeatability? The AirTAC HFZ25 belongs to the standard HFZ parallel gripper series by AirTAC (dimensionally equivalent to SMC MHZ2-25D). It features a 25mm bore, double-acting operation, and a standard integrated magnet for position sensing.

Key Features of AirTAC HFZ25

✅ Parallel-jaw pneumatic air gripper (HFZ series – equivalent to SMC MHZ2-25D).

✅ Bore: 25 mm (delivers strong clamping force for medium-sized mechanical, electronic, and packaged parts).

✅ Action: Double acting (pneumatic open and close).

✅ Integrated precision linear guideway ensures rigid parallel jaw travel, high moment resistance, and ±0.01mm repeatability.

✅ Supports both external (OD) clamping and internal (ID) expanding gripping modes.

✅ Standard built-in magnet and integrated body sensor slots enable reliable part-present and open/closed detection.

✅ Lightweight hard-anodized aluminum alloy body operates reliably over millions of cycles without air line lubrication.

Technical Specifications

✅ Model: HFZ25

✅ Series: HFZ (Parallel Style Pneumatic Air Gripper)

✅ Bore: 25 mm

✅ Action: Double acting

✅ Total jaw opening/closing stroke: 14 mm

✅ Effective gripping force (at 0.5 MPa, 30mm gripping point): ~ 65 N (external) / ~ 79 N (internal)

✅ Magnet: Yes (built-in standard)

✅ Operating pressure range: 0.1 – 0.7 MPa (14 ~ 100 psi)

✅ Maximum operating frequency: 180 cycles/min

✅ Repeatability: ±0.01 mm

✅ Operating temperature: -20°C ~ +70°C

✅ Port size: M5 × 0.8

✅ Lubrication: Not required

✅ Fluid: Air (filtered by 40μm filter element)

Typical Applications

✅ High-speed pick-and-place end-of-arm tooling on industrial robots and Cartesian XYZ gantries

✅ Automotive, electronics, semiconductor, medical device, and precision CNC machine tending

✅ Packaging, bottling, case-packing, and automated part-transfer cells

✅ Direct drop-in dimensional and functional replacement for SMC MHZ2-25D parallel grippers

Why Choose the AirTAC HFZ25?

The AirTAC HFZ25 pairs robust 25mm-bore clamping force with a rigid linear-rail jaw guide delivering ±0.01mm repeatability at up to 180 cycles per minute. Its standard magnetic sensing grooves and MHZ2 interchangeability make it a dependable standard for automated handling.

Selection & Installation Tips

✅ Confirm the HFZ25 specification (25mm bore, double-acting) and keep custom gripper finger lengths within catalog limits for secure clamping.

✅ Supply clean compressed air filtered to 40μm or finer within the 0.1 – 0.7 MPa operating pressure range.

✅ Install speed controllers on both M5×0.8 ports to moderate jaw closing speed and prevent impact shock on the linear guide.

✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the body grooves to verify part-gripping status.

Hotline: 0084 787900099

Social Share

Related Posts

hotline
Working hours: 9:00 - 18:00 (Excluding Saturday and Sunday)
©T Solution industry Vietnam Co., LTD2026. Login