Our News & Events

Home / News
AirTAC PSL802A – Pneumatic Elbow Speed Controller 8mm Tube × PT 1/4" Thread Genuine

AirTAC PSL802A – Pneumatic Elbow Speed Controller 8mm Tube × PT 1/4" Thread Genuine

Events, Article & Sharing      19/11/2026

AirTAC PSL802A – Pneumatic Elbow Speed Controller 8mm Tube × PT 1/4" Thread

Looking for a compact 360°-swivel pneumatic elbow speed controller for 8mm tubing and PT 1/4" ports with tamper-resistant screwdriver adjustment? The AirTAC PSL802A belongs to the PSL flow control series by AirTAC. It features an 8mm push-to-connect tube port (8), PT 1/4" male thread (02), meter-out flow regulation, and a slotted screw adjuster with lock nut (A).

Key Features of AirTAC PSL802A

✅ 360°-swivel pneumatic elbow speed controller (PSL series – Meter-Out).

✅ Push-in tube size (OD): 8 mm (8).

✅ Male thread size: PT 1/4" (02) with pre-applied thread sealant.

✅ Adjustment style: Slotted screwdriver adjustment with lock nut (A suffix), preventing accidental speed tampering during production.

✅ Meter-out flow regulation: allows unrestricted free-flow supply air through the check valve while precisely metering exhaust air for smooth, stick-slip-free cylinder motion.

✅ Durable PBT resin body paired with a nickel-plated brass base allows 360° elbow rotation for clean tubing routing.

Technical Specifications

✅ Model: PSL802A (PSL 8-02A / PSL8-02A)

✅ Series: PSL (Pneumatic Elbow Speed Controller – Meter-Out)

✅ Tube OD size: 8 mm

✅ Male thread size: PT 1/4"

✅ Control direction: Meter-out (exhaust throttling)

✅ Adjustment type: Slotted screw with lock nut (A suffix)

✅ Operating pressure range: 0.1 – 1.0 MPa (14 ~ 145 psi)

✅ Negative pressure (Vacuum): -100 kPa (-750 mmHg)

✅ Proof pressure: 1.5 MPa (215 psi)

✅ Operating temperature: -20°C ~ +70°C

✅ Body materials: Engineering PBT resin & nickel-plated brass

✅ Compatible tubing: PU, PA (Nylon), PE tubing with 8mm outer diameter

✅ Fluid: Air (filtered by 40μm filter element)

Typical Applications

✅ Precisely regulating extension and retraction speeds on medium-bore pneumatic cylinders (32mm, 40mm, 50mm, 63mm)

✅ Automated packaging, filling, labeling, electronics assembly, textile, and woodworking machinery

✅ Production stations requiring tamper-resistant slotted screw adjustment (A) to preserve validated cycle times

✅ Direct mounting onto cylinder or solenoid valve ports in tight enclosures using the 360° swivel body

Why Choose the AirTAC PSL802A?

The AirTAC PSL802A delivers linear, repeatable exhaust flow metering that eliminates jerky cylinder movement. Its low-profile slotted screw adjuster (A) prevents unauthorized speed changes while its 360° swivel elbow keeps pneumatic tubing neat and stress-free.

Selection & Installation Tips

✅ Confirm 8mm tube OD (8), PT 1/4" thread (02), and slotted screw adjuster (A) match your requirements (select AirTAC PSL802 if a manual knurled knob is preferred).

✅ Tighten the PT 1/4" brass hex base into the port with a wrench—never apply installation torque to the plastic elbow housing.

✅ Insert squarely cut 8mm PU tubing firmly past the internal O-ring until it hits the tube stop.

✅ Turn the slotted needle screw slowly to set the desired cylinder speed, then tighten the lock nut securely.

Hotline: 0084 787900099

Social Share

Related Posts

hotline
Working hours: 9:00 - 18:00 (Excluding Saturday and Sunday)
©T Solution industry Vietnam Co., LTD2026. Login