AirTAC SDA20x10SB – Compact Square Pneumatic Cylinder Bore 20 × Stroke 10mm
Looking for an ultra-slim compact square pneumatic cylinder with a 10mm stroke, built-in magnetic sensing, and a male-threaded piston rod? The AirTAC SDA20x10SB (SDA20X10SB) belongs to the standard SDA compact cylinder series by AirTAC. It features a 20mm bore, 10mm stroke, double-acting operation, an integrated magnet (S), and a male-threaded rod end (B).
Key Features of AirTAC SDA20x10SB
✅ Space-saving compact square pneumatic cylinder (SDA series – Double Acting).
✅ Bore: 20 mm.
✅ Stroke: 10 mm (short travel for fast actuation cycles).
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Piston rod end: Standard male thread M8×1.25 (B suffix) enables direct mounting of clevis joints, pushers, or lock nuts.
✅ Tie-rodless extruded aluminum alloy body includes flush sensor mounting grooves and a self-lubricating rod bearing.
✅ Dual-end rubber bumpers ensure smooth, quiet, lubrication-free operation.

Technical Specifications
✅ Model: SDA20x10SB (SDA20X10SB)
✅ Series: SDA (Compact Square Cylinder – Double Acting)
✅ Bore: 20 mm
✅ Stroke: 10 mm
✅ Rod diameter: 10 mm
✅ Rod end type: Male thread M8×1.25 (B suffix)
✅ Action: Double acting
✅ Cushioning: NBR rubber bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5 × 0.8
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Short-stroke (10mm) workpiece clamping, stopping, press-fitting, and conveyor diverting mechanisms
✅ Electronics, PCB handling, semiconductor, and automated medical device assembly lines
✅ Packaging, labeling, filling, and sorting stations with tight installation envelopes
✅ Precision fixtures requiring an M8×1.25 male rod end and magnetic stroke-end feedback
Why Choose the AirTAC SDA20x10SB?
The AirTAC SDA20x10SB maximizes space efficiency with its compact square profile, durable M8×1.25 male-threaded rod, and standard magnetic piston. Dual rubber bumpers and a self-lubricating rod bushing ensure quiet, maintenance-free service.
Selection & Installation Tips
✅ Confirm 20mm bore, 10mm stroke, magnetic piston (S), and M8×1.25 male rod thread (B) match your mechanical linkage.
✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the integrated barrel slots.
✅ Use M5×0.8 fittings equipped with sealing washers and avoid radial side loads on the piston rod.
Hotline: 0084 787900099