AirTAC SAU50x300 – Square Profile Standard Pneumatic Cylinder Bore 50 × Stroke 300mm
Looking for a 50mm bore standard pneumatic cylinder with a 300mm stroke, a sleek tie-rodless square barrel for easy cleaning, and adjustable air cushioning? The AirTAC SAU50x300 (SAU50X300) belongs to the SAU series by AirTAC. It features a 50mm bore, 300mm stroke, double-acting operation, and a non-magnetic piston.
Key Features of AirTAC SAU50x300
✅ Square-profile tie-rodless standard pneumatic cylinder (SAU series).
✅ Bore: 50 mm (delivers strong pushing and pulling force for medium-to-heavy loads).
✅ Stroke: 300 mm.
✅ Action: Double acting.
✅ Non-magnetic piston (standard version; choose AirTAC SAU50x300S if magnetic sensor mounting is needed).
✅ Dual-end adjustable air cushions smoothly decelerate moving loads at the end of the 300mm stroke.
✅ Extruded square aluminum barrel eliminates exposed external tie rods, preventing dust accumulation and simplifying washdown.
✅ End-cover mounting dimensions are fully compatible with standard AirTAC SC50 mounting brackets (FA, FB, LB, CA, CB).

Technical Specifications
✅ Model: SAU50x300 (SAU50X300)
✅ Series: SAU (Square Profile Tie-Rodless Standard Cylinder)
✅ Bore: 50 mm
✅ Stroke: 300 mm
✅ Rod diameter: 20 mm (M16×1.5 rod thread)
✅ Action: Double acting
✅ Cushioning: Adjustable air cushion at both ends
✅ Magnet: No (select S suffix for magnetic piston)
✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 800 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/4"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ 300mm-stroke pushing, lifting, pressing, and sorting mechanisms on automated industrial conveyors
✅ Carton packaging, filling, food, beverage, and pharmaceutical machinery requiring clean, smooth-walled cylinder barrels
✅ Woodworking, textile, printing, converting, and general mechanical clamping fixtures
✅ Aesthetic drop-in upgrade for standard 50mm bore × 300mm stroke pneumatic cylinders
Why Choose the AirTAC SAU50x300?
The AirTAC SAU50x300 combines the high thrust of a 50mm bore with a clean, tie-rodless square housing that resists dirt buildup. Tunable dual air cushions and full mounting compatibility with SC50 accessories simplify installation and long-term maintenance.
Selection & Installation Tips
✅ Confirm 50mm bore, 300mm stroke, and M16×1.5 rod thread match your mechanical linkage.
✅ Note that SAU50x300 is non-magnetic; select AirTAC SAU50x300S if magnetic position sensing is required.
✅ Supply clean compressed air filtered to 40μm or finer and avoid radial side loads across the 300mm stroke.
✅ Fine-tune the cushion needle screws on both end caps alongside speed controllers on the PT 1/4" ports for smooth stopping.
Hotline: 0084 787900099