AirTAC SDA63x40 – High-Force Compact Square Pneumatic Cylinder Bore 63 × Stroke 40mm
Looking for a heavy-duty 63mm bore compact square pneumatic cylinder with a 40mm stroke that delivers strong pressing force within a slim installation depth? The AirTAC SDA63x40 (SDA63X40) belongs to the standard SDA compact cylinder series by AirTAC. It features a 63mm bore, 40mm stroke, double-acting operation, and a non-magnetic piston.
Key Features of AirTAC SDA63x40
✅ High-thrust large-bore compact square pneumatic cylinder (SDA series – Double Acting).
✅ Bore: 63 mm (delivers strong linear pressing and clamping force inside a compact square housing).
✅ Stroke: 40 mm.
✅ Action: Double acting.
✅ Non-magnetic piston (standard version; choose AirTAC SDA63x40S if magnetic sensor mounting is needed).
✅ Piston rod end: Sturdy 20mm piston rod with standard female thread M16×1.5 (select B suffix if a male-threaded rod end is required).
✅ Tie-rodless extruded aluminum alloy body features through-body mounting holes and a self-lubricating rod bearing.
✅ Dual-end rubber bumpers absorb impact noise and ensure smooth, lubrication-free operation.

Technical Specifications
✅ Model: SDA63x40 (SDA63X40)
✅ Series: SDA (Compact Square Cylinder – Double Acting)
✅ Bore: 63 mm
✅ Stroke: 40 mm
✅ Rod diameter: 20 mm
✅ Rod end type: Female thread M16×1.5 (standard)
✅ Action: Double acting
✅ Cushioning: NBR rubber bumper pads at both ends
✅ Magnet: No (select S suffix for magnetic piston)
✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/4"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Pneumatic presses, stamping dies, balers, and heavy-duty workpiece clamping jigs over a 40mm stroke in depth-restricted spaces
✅ Carton packaging, industrial filling, food, beverage, and automotive assembly lines
✅ Automated welding fixtures and medium-to-heavy lifting stages
✅ Space-constrained applications requiring high 63mm-bore thrust without cylinder-mounted magnetic sensors
Why Choose the AirTAC SDA63x40?
The AirTAC SDA63x40 packs the high thrust of a 63mm bore into a space-saving square body, reducing overall machine length compared to standard SC63 tie-rod cylinders. Convenient through-body mounting holes, a rigid 20mm piston rod, and lubrication-free operation ensure reliable, low-maintenance performance.
Selection & Installation Tips
✅ Confirm 63mm bore, 40mm stroke, and M16×1.5 female rod thread match your clamping or pressing fixture.
✅ Note that SDA63x40 is non-magnetic; select AirTAC SDA63x40S if magnetic position detection is required.
✅ Supply clean compressed air filtered to 40μm or finer with adequate flow capacity for the PT 1/4" ports.
✅ Avoid radial side loads on the 20mm piston rod and use speed controllers for smooth deceleration.
Hotline: 0084 787900099