AirTAC SDA16x25S – Compact Square Pneumatic Cylinder Bore 16 × Stroke 25mm
Looking for an ultra-compact square pneumatic cylinder with a 16mm bore, 25mm stroke, and built-in magnetic sensing for tight automation envelopes? The AirTAC SDA16x25S belongs to the standard SDA compact cylinder series by AirTAC. It features a 16mm bore, 25mm stroke, double-acting operation, and a standard integrated magnet (S).
Key Features of AirTAC SDA16x25S
✅ Miniature space-saving compact square pneumatic cylinder (SDA series – Double Acting).
✅ Bore: 16 mm (ultra-slim profile tailored for confined machine spaces).
✅ Stroke: 25 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Piston rod end: Standard female thread M5×0.8 (select B suffix if a male-threaded rod end M6×1.0 is required).
✅ Tie-rodless extruded aluminum alloy body includes through-body mounting holes, flush sensor mounting grooves, and a self-lubricating rod bearing.
✅ Dual-end rubber bumpers ensure smooth, quiet, lubrication-free operation.

Technical Specifications
✅ Model: SDA16x25S (SDA16X25S)
✅ Series: SDA (Compact Square Cylinder – Double Acting)
✅ Bore: 16 mm
✅ Stroke: 25 mm
✅ Rod diameter: 8 mm
✅ Rod end type: Female thread M5×0.8 (standard)
✅ Action: Double acting
✅ Cushioning: NBR rubber bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5 × 0.8
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ 25mm-stroke miniature part pushing, stopping, clamping, and press-fitting in ultra-compact automation cells
✅ Electronics, PCB handling, semiconductor, optical, and automated medical device assembly
✅ Miniature packaging, labeling, date-coding, and high-speed sorting machinery
✅ Compact mechanical jigs requiring magnetic stroke-end verification
Why Choose the AirTAC SDA16x25S?
The AirTAC SDA16x25S maximizes space efficiency with its miniature 16mm square body and direct through-body mounting holes. Equipped with a standard magnetic piston, quiet rubber bumpers, and a self-lubricating rod bearing, it delivers reliable, low-maintenance performance.
Selection & Installation Tips
✅ Confirm 16mm bore, 25mm stroke, magnetic piston (S), and standard M5×0.8 female rod thread (or select AirTAC SDA16x25SB for a male M6×1.0 rod thread).
✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the integrated barrel slots.
✅ Use M5×0.8 fittings equipped with sealing washers and avoid radial side loads on the 8mm piston rod.
Hotline: 0084 787900099