Our News & Events

Home / News
AirTAC MI25x150SCA – ISO6432 Stainless Steel Mini Round Pneumatic Cylinder With Magnet & Clevis Bore 25mm Stroke 150mm Genuine

AirTAC MI25x150SCA – ISO6432 Stainless Steel Mini Round Pneumatic Cylinder With Magnet & Clevis Bore 25mm Stroke 150mm Genuine

Events, Article & Sharing      21/11/2026

AirTAC MI25x150SCA – ISO6432 Stainless Steel Mini Round Pneumatic Cylinder Bore 25 × Stroke 150mm

Looking for an ISO6432 standardized 25mm bore stainless steel mini round pneumatic cylinder with a 150mm stroke, built-in magnetic sensing, and a rear single-clevis pivot cap for angular linkages? The AirTAC MI25x150SCA (MI25X150SCA) belongs to the MI series by AirTAC. It features a 25mm bore, 150mm stroke, double-acting operation, an integrated magnet (S), and a rear single-clevis cap with pivot pin hole (CA).

Key Features of AirTAC MI25x150SCA

✅ ISO6432 international standard stainless steel mini round pneumatic cylinder (MI series – Double Acting).

✅ Bore: 25 mm (delivers strong linear thrust in a compact round profile).

✅ Stroke: 150 mm.

✅ Action: Double acting.

✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.

✅ Rear single-clevis end cap with pivot hole (CA suffix) allows smooth angular oscillation across the 150mm stroke without inducing side loads on the piston rod.

✅ Corrosion-resistant SUS304 stainless steel barrel paired with lightweight anodized aluminum end caps.

✅ Built-in rubber bumpers at both ends absorb impact noise and ensure smooth, lubrication-free operation.

Technical Specifications

✅ Model: MI25x150SCA (MI25X150SCA)

✅ Series: MI (ISO6432 Stainless Steel Mini Round Cylinder)

✅ Bore: 25 mm

✅ Stroke: 150 mm

✅ Rod diameter: 10 mm (ISO standard M10×1.25 rod thread)

✅ Action: Double acting

✅ Cushioning: Rubber bumper pads at both ends

✅ Magnet: Yes (S – standard)

✅ Back cover type: Single clevis with pivot hole (CA)

✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)

✅ Proof pressure: 1.5 MPa (215 psi)

✅ Piston speed: 30 – 800 mm/s

✅ Operating temperature: -20°C ~ +70°C

✅ Port size: PT 1/8"

✅ Fluid: Air (filtered by 40μm filter element)

Typical Applications

✅ 150mm-stroke pivoting lid lifters, conveyor diverter gates, and rocker-arm linkages utilizing the rear CA clevis mount

✅ Packaging, labeling, filling, food, beverage, and pharmaceutical machinery requiring a clean SUS304 stainless steel barrel

✅ Electronics assembly, textile, printing, and automated equipment utilizing magnetic stroke-end sensing

✅ ISO6432 standardized drop-in replacement for 25mm bore × 150mm stroke clevis mini round cylinders

Why Choose the AirTAC MI25x150SCA?

The AirTAC MI25x150SCA combines ISO6432 dimensional interchangeability, a durable SUS304 stainless barrel, an articulated CA clevis rear pivot, and built-in magnetic sensing (S). Quiet dual rubber bumpers and lubrication-free operation keep maintenance minimal.

Selection & Installation Tips

✅ Confirm 25mm bore, 150mm stroke, magnetic piston (S), rear clevis cap (CA), and M10×1.25 rod thread match your mechanical linkage.

✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.

✅ Mount compatible magnetic sensors (such as CMSG or DMSG series with BMA25 mounting band) onto the stainless steel barrel.

✅ Fit a properly sized pivot pin through the rear CA clevis eye and install speed controllers on both PT 1/8" ports for smooth travel.

Hotline: 0084 787900099

Social Share

Related Posts

hotline
Working hours: 9:00 - 18:00 (Excluding Saturday and Sunday)
©T Solution industry Vietnam Co., LTD2026. Login