AirTAC SC40x30 – Standard Tie-Rod Pneumatic Cylinder Bore 40 × Stroke 30mm
Looking for a rugged 40mm bore standard tie-rod pneumatic cylinder with a crisp 30mm short stroke and adjustable air cushioning? The AirTAC SC40x30 (SC40X30) belongs to the standard SC series by AirTAC. It features a 40mm bore, 30mm stroke, double-acting operation, and a non-magnetic piston.
Key Features of AirTAC SC40x30
✅ Industry-standard four-tie-rod pneumatic cylinder (SC series – Double Acting).
✅ Bore: 40 mm (provides reliable pushing and pulling force for general industrial automation).
✅ Stroke: 30 mm (short, responsive travel).
✅ Action: Double acting.
✅ Non-magnetic piston (standard version; choose AirTAC SC40x30S if magnetic sensor mounting is needed).
✅ Dual-end adjustable air cushions smoothly decelerate loads and prevent mechanical shock at stroke limits.
✅ Hard-anodized aluminum alloy barrel and self-lubricating rod bearing provide long, lubrication-free service life.
✅ Compatible with all standard SC40 mounting accessories including FA/FB flanges, LB foot mounts, and CA/CB clevises.

Technical Specifications
✅ Model: SC40x30 (SC40X30)
✅ Series: SC (Standard Tie-Rod Pneumatic Cylinder)
✅ Bore: 40 mm
✅ Stroke: 30 mm
✅ Rod diameter: 16 mm (M12×1.25 rod thread)
✅ Action: Double acting
✅ Cushioning: Adjustable air cushion at both ends
✅ Magnet: No (select S suffix for magnetic piston)
✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 800 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/4"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ 30mm-stroke conveyor stopping gates, press-fitting, stamping, and workpiece clamping fixtures
✅ Carton packaging, filling, food, beverage, and converting machinery
✅ Woodworking, textile, printing, and industrial machinery not requiring cylinder-mounted magnetic sensors
✅ Easy maintenance and drop-in replacement using universally stocked SC40 brackets and seal kits
Why Choose the AirTAC SC40x30?
The AirTAC SC40x30 provides an economical, durable, and widely supported actuation solution for 30mm short-stroke applications. Tunable dual air cushions and lubrication-free operation ensure smooth, low-maintenance performance.
Selection & Installation Tips
✅ Confirm 40mm bore, 30mm stroke, and M12×1.25 rod thread match your mechanical linkage.
✅ Note that SC40x30 is non-magnetic; select AirTAC SC40x30S if magnetic position sensing is required.
✅ Supply clean compressed air filtered to 40μm or finer and avoid radial side loads on the 16mm piston rod.
✅ Fine-tune the cushion needle screws on both end caps alongside speed controllers on the PT 1/4" ports for smooth deceleration.
Hotline: 0084 787900099