Our News & Events

Home / News
AirTAC TACQ32x75 – JIS Standard Double-Rod Compact Square Pneumatic Cylinder Bore 32mm Stroke 75mm Genuine

AirTAC TACQ32x75 – JIS Standard Double-Rod Compact Square Pneumatic Cylinder Bore 32mm Stroke 75mm Genuine

Events, Article & Sharing      21/11/2026

AirTAC TACQ32x75 – JIS Standard Double-Rod Compact Square Pneumatic Cylinder Bore 32 × Stroke 75mm

Looking for a 32mm bore JIS standard compact square pneumatic cylinder with a 75mm stroke and a through-rod (double-rod) architecture for symmetrical actuation or rear mechanical stops? The AirTAC TACQ32x75 belongs to the TACQ series by AirTAC (dimensionally equivalent to SMC CQ2W). It features a 32mm bore, 75mm stroke, double-acting through-rod operation, and a non-magnetic piston.

Key Features of AirTAC TACQ32x75

✅ JIS standard double-rod compact square pneumatic cylinder (TACQ series – drop-in dimensional match for SMC CQ2WB32-75D).

✅ Bore: 32 mm (delivers equal, balanced pushing and pulling force in both stroke directions).

✅ Stroke: 75 mm.

✅ Action: Double acting, double rod (through-rod construction).

✅ Non-magnetic piston (standard version; choose AirTAC TACQ32x75S if magnetic sensor mounting is needed).

✅ Piston rod ends: 16mm through-rod with standard M8×1.25 female threads at both ends (select B suffix if M14×1.5 male rod ends are required).

✅ Dual-end rod bushings improve radial rigidity across the 75mm stroke while permitting rear stop collars, external shock absorbers, or dual-sided linkage connections.

✅ Built-in rubber bumpers at both ends ensure quiet, smooth, lubrication-free operation.

Technical Specifications

✅ Model: TACQ32x75 (TACQ32X75)

✅ Series: TACQ (JIS Standard Double-Rod Compact Cylinder)

✅ Bore: 32 mm

✅ Stroke: 75 mm

✅ Rod diameter: 16 mm (double through-rod)

✅ Rod end type: Female thread M8×1.25 at both ends (standard)

✅ Action: Double acting – Double rod

✅ Cushioning: Rubber bumper pads at both ends

✅ Magnet: No (select S suffix for magnetic piston)

✅ Operating pressure range: 0.1 – 1.0 MPa (14 ~ 145 psi)

✅ Proof pressure: 1.5 MPa (215 psi)

✅ Piston speed: 30 – 500 mm/s

✅ Operating temperature: -20°C ~ +70°C

✅ Port size: PT 1/8"

✅ Fluid: Air (filtered by 40μm filter element)

Typical Applications

✅ Symmetrical dual-sided actuation, bidirectional conveyor diverters, and simultaneous linkage drives

✅ Mechanical fixtures requiring rear stroke-stop collars, external hydraulic shock absorbers, or visual stroke indicators

✅ Packaging, filling, labeling, food processing, and automated component assembly lines

✅ Direct dimensional replacement for JIS double-rod compact cylinders such as SMC CQ2WB32-75D

Why Choose the AirTAC TACQ32x75?

The AirTAC TACQ32x75 enhances rod stability via symmetrical dual-end bearings while delivering identical thrust in both extension and retraction. Its space-saving JIS square body, quiet rubber bumpers, and lubrication-free design optimize machine reliability.

Selection & Installation Tips

✅ Confirm 32mm bore, 75mm stroke, double-rod design (TACQ), and M8×1.25 female threads at both ends (or select AirTAC TACQ32x75B for M14×1.5 male rod ends).

✅ Note that TACQ32x75 is non-magnetic; select AirTAC TACQ32x75S if magnetic position detection is required.

✅ Provide sufficient clearance at both ends of the cylinder for unobstructed 75mm rod extension.

✅ Supply clean compressed air filtered to 40μm or finer and use PT 1/8" fittings for the air ports.

Hotline: 0084 787900099

Social Share

Related Posts

hotline
Working hours: 9:00 - 18:00 (Excluding Saturday and Sunday)
©T Solution industry Vietnam Co., LTD2026. Login