AirTAC SDA80x50S – Heavy-Duty Compact Square Pneumatic Cylinder Bore 80 × Stroke 50mm
Looking for a heavy-duty 80mm bore compact square pneumatic cylinder with a 50mm stroke that delivers immense pressing force inside a space-saving footprint? The AirTAC SDA80x50S (SDA80X50S) belongs to the standard SDA compact cylinder series by AirTAC. It features an 80mm bore, 50mm stroke, double-acting operation, and a standard integrated magnet (S).
Key Features of AirTAC SDA80x50S
✅ Heavy-duty large-bore compact square pneumatic cylinder (SDA series – Double Acting).
✅ Bore: 80 mm (generates substantial linear pressing and clamping force within a low-profile square envelope).
✅ Stroke: 50 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Piston rod end: Robust 25mm piston rod with standard female thread M20×2.5 (select B suffix if a male-threaded rod end is required).
✅ Tie-rodless extruded aluminum alloy body includes through-body mounting holes, flush sensor grooves, and a self-lubricating rod bearing.
✅ Dual-end rubber bumpers absorb impact noise and ensure smooth, lubrication-free operation.

Technical Specifications
✅ Model: SDA80x50S (SDA80X50S)
✅ Series: SDA (Compact Square Cylinder – Double Acting)
✅ Bore: 80 mm
✅ Stroke: 50 mm
✅ Rod diameter: 25 mm
✅ Rod end type: Female thread M20×2.5 (standard)
✅ Action: Double acting
✅ Cushioning: NBR rubber bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 3/8"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Pneumatic presses, stamping dies, balers, heat-sealing stations, and heavy-duty workpiece clamping jigs in depth-restricted machinery
✅ Large carton packaging, industrial filling, brick/tile manufacturing, woodworking, and automotive assembly lines
✅ Automated welding fixtures and heavy-load 50mm-stroke lifting stages
✅ Space-constrained applications requiring high 80mm-bore thrust and magnetic stroke-end verification
Why Choose the AirTAC SDA80x50S?
The AirTAC SDA80x50S packs the high thrust of an 80mm bore into an ultra-slim square body, saving substantial installation space compared to standard SC80 tie-rod cylinders. High-flow PT 3/8" ports, a sturdy 25mm piston rod, and a standard magnetic piston ensure powerful, reliable performance.
Selection & Installation Tips
✅ Confirm 80mm bore, 50mm stroke, magnetic piston (S), and M20×2.5 female rod thread match your clamping or pressing fixture.
✅ Supply clean compressed air filtered to 40μm or finer with adequate flow capacity for the PT 3/8" ports.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the integrated barrel slots.
✅ Avoid radial side loads on the 25mm piston rod and use speed controllers for smooth deceleration.
Hotline: 0084 787900099