AirTAC MAC25x300SCA – Aluminum Mini Round Pneumatic Cylinder Bore 25 × Stroke 300mm
Looking for a lightweight 25mm bore aluminum mini round pneumatic cylinder with a long 300mm stroke, built-in magnetic sensing, and a rear single-clevis pivot cap for angular motion linkages? The AirTAC MAC25x300SCA belongs to the MAC aluminum mini cylinder series by AirTAC. It features a 25mm bore, 300mm stroke, double-acting operation, an integrated magnet (S), and a rear single-clevis cap with pivot pin hole (CA).
Key Features of AirTAC MAC25x300SCA
✅ Lightweight aluminum alloy mini round pneumatic cylinder (MAC series – Double Acting).
✅ Bore: 25 mm (delivers strong linear thrust in a compact round profile).
✅ Stroke: 300 mm (long travel reach for extended rocker-arm linkages).
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Rear single-clevis end cap with pivot hole (CA suffix) allows smooth angular oscillation across the 300mm stroke without inducing side loads on the piston rod.
✅ Anodized aluminum barrel and end covers minimize moving mass, while dual-end rubber bumpers ensure quiet, lubrication-free operation.

Technical Specifications
✅ Model: MAC25x300SCA (MAC25X300SCA)
✅ Series: MAC (Aluminum Mini Round Cylinder)
✅ Bore: 25 mm
✅ Stroke: 300 mm
✅ Rod diameter: 10 mm (M10×1.25 rod thread)
✅ Action: Double acting
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Back cover type: Single clevis with pivot hole (CA)
✅ Operating pressure range: 0.15 – 0.8 MPa (22 ~ 115 psi)
✅ Proof pressure: 1.2 MPa (175 psi)
✅ Piston speed: 30 – 800 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/8"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ 300mm-stroke pivoting lid lifters, conveyor diverter gates, and long-arm angular mechanisms utilizing the rear CA clevis mount
✅ Packaging, labeling, filling, food processing, and converting lines
✅ Electronics assembly, textile, printing, and automated equipment utilizing magnetic stroke-end sensing
✅ Lightweight long-stroke actuators mounted on robotic arms and pick-and-place systems
Why Choose the AirTAC MAC25x300SCA?
The AirTAC MAC25x300SCA combines featherweight anodized aluminum construction with an extended 300mm stroke, an articulating CA clevis rear pivot, and built-in magnetic sensing (S). Quiet dual rubber bumpers and lubrication-free operation ensure reliable, low-maintenance performance.
Selection & Installation Tips
✅ Confirm 25mm bore, 300mm stroke, magnetic piston (S), rear clevis cap (CA), and M10×1.25 rod thread match your mechanical linkage.
✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series with BMA25 mounting band) onto the aluminum barrel.
✅ Fit a properly sized pivot pin through the rear CA clevis eye and install speed controllers on both PT 1/8" ports for smooth deceleration across the 300mm stroke.
Hotline: 0084 787900099