AirTAC MD16x40 – Multi-Mount Mini Pneumatic Cylinder Bore 16 × Stroke 40mm
Looking for a compact 16mm bore multi-mount mini pneumatic cylinder with a 40mm stroke and direct-bolting square end blocks that eliminate external mounting brackets? The AirTAC MD16x40 (MD16X40) belongs to the versatile MD multi-mount cylinder series by AirTAC. It features a 16mm bore, 40mm stroke, double-acting operation, and a standard non-magnetic piston.
Key Features of AirTAC MD16x40
✅ Multi-mount mini pneumatic cylinder combining a stainless steel barrel with square direct-mounting end blocks (MD series).
✅ Bore: 16 mm (compact footprint ideal for light, precise linear actuation).
✅ Stroke: 40 mm.
✅ Action: Double acting.
✅ Non-magnetic piston (standard version; choose AirTAC MD16x40S if magnetic sensor mounting is needed).
✅ Square front and rear end blocks feature built-in through-holes and tapped mounting faces, enabling direct horizontal, vertical, or face mounting without separate brackets.
✅ Dual-end rubber bumpers ensure quiet, smooth, lubrication-free operation.

Technical Specifications
✅ Model: MD16x40 (MD16X40)
✅ Series: MD (Multi-Mount Mini Pneumatic Cylinder)
✅ Bore: 16 mm
✅ Stroke: 40 mm
✅ Rod diameter: 6 mm (M6×1.0 rod thread)
✅ Action: Double acting
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: No (select S suffix for magnetic piston)
✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 800 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5 × 0.8
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ 40mm-stroke light part pushing, sorting diverters, indexing pins, and small-part clamping in tight spaces
✅ Electronics assembly, PCB handling, semiconductor, medical device, and laboratory automation
✅ Compact packaging, labeling, date-coding, and food processing machinery
✅ Space-constrained mechanisms not requiring cylinder-mounted magnetic sensors
Why Choose the AirTAC MD16x40?
The AirTAC MD16x40 eliminates external mounting brackets thanks to its integrated multi-face square end blocks. A durable stainless barrel, slim 16mm bore profile, and lubrication-free operation ensure reliable, low-maintenance performance.
Selection & Installation Tips
✅ Confirm 16mm bore, 40mm stroke, MD multi-mount series, and M6×1.0 rod thread match your mechanical setup.
✅ Note that MD16x40 is non-magnetic; select AirTAC MD16x40S if magnetic position detection is required.
✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.
✅ Use M5×0.8 fittings with sealing washers and avoid radial side loads on the 6mm piston rod.
Hotline: 0084 787900099