AirTAC HFD25x40 – Long-Stroke Parallel Pneumatic Air Gripper Bore 25 × Stroke 40mm
Looking for a long-stroke parallel pneumatic air gripper with a wide 40mm jaw opening span to handle multiple workpiece sizes without finger changeovers? The AirTAC HFD25x40 belongs to the HFD long-stroke parallel gripper series by AirTAC (dimensionally equivalent to SMC MHL2-25D). It features a 25mm bore, 40mm total jaw opening/closing stroke, double-acting operation, and a standard integrated magnet for position sensing.
Key Features of AirTAC HFD25x40
✅ Long-stroke parallel-jaw pneumatic air gripper (HFD series – equivalent to SMC MHL2-25D).
✅ Bore: 25 mm (delivers strong clamping force for medium-sized mechanical parts, bottles, and cartons).
✅ Total jaw opening/closing stroke: 40 mm (accommodates wide variations in part dimensions on flexible production lines).
✅ Action: Double acting (pneumatic open and close).
✅ Integrated linear guidance synchronizes parallel jaw travel, supports off-center moment loads, and provides ±0.02mm repeatability.
✅ Supports both external (OD) clamping and internal (ID) expanding gripping modes.
✅ Standard built-in magnet and body sensor grooves allow reliable confirmation of open, closed, or part-gripped positions.

Technical Specifications
✅ Model: HFD25x40 (HFD25X40)
✅ Series: HFD (Long Stroke Parallel Pneumatic Air Gripper)
✅ Bore: 25 mm
✅ Total jaw opening/closing stroke: 40 mm
✅ Action: Double acting
✅ Effective gripping force (at 0.5 MPa, 30mm gripping point): ~ 66 N (external) / ~ 80 N (internal)
✅ Magnet: Yes (built-in standard)
✅ Operating pressure range: 0.1 – 0.7 MPa (14 ~ 100 psi)
✅ Maximum operating frequency: 60 cycles/min
✅ Repeatability: ±0.02 mm
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5 × 0.8
✅ Lubrication: Not required
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Flexible pick-and-place end-of-arm tooling on industrial robots and Cartesian XYZ gantries handling multi-size workpieces
✅ Packaging, bottling, case-packing, tray handling, and automated CNC machine tending
✅ Automotive, electronics, appliance, and precision mechanical assembly cells
✅ Direct drop-in dimensional and functional replacement for SMC MHL2-25D long-stroke grippers
Why Choose the AirTAC HFD25x40?
The AirTAC HFD25x40 overcomes the narrow jaw travel of standard grippers with a generous 40mm stroke, enabling a single tooling set to handle varied part sizes. Strong 25mm-bore gripping force, synchronized parallel travel, and standard magnetic sensor slots maximize automation flexibility.
Selection & Installation Tips
✅ Confirm the HFD25x40 specification (25mm bore, 40mm total jaw stroke, double-acting) and keep custom finger lengths within catalog limits to prevent guide overload.
✅ Supply clean compressed air filtered to 40μm or finer within the 0.1 – 0.7 MPa operating pressure range.
✅ Install speed controllers on both M5×0.8 ports to moderate jaw velocity and minimize inertia shock across the 40mm stroke.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the body grooves to verify part-gripping status.
Hotline: 0084 787900099