AirTAC MA20x75SCA – Stainless Steel Mini Round Pneumatic Cylinder Bore 20 × Stroke 75mm
Looking for a durable 20mm bore stainless steel mini round pneumatic cylinder with a 75mm stroke, built-in magnetic sensing, and a rear single-clevis pivot cap for angular linkages? The AirTAC MA20x75SCA (MA20X75SCA) belongs to the widely used MA mini cylinder series by AirTAC. It features a 20mm bore, 75mm stroke, double-acting operation, an integrated magnet (S), and a rear single-clevis cap with pivot pin hole (CA).
Key Features of AirTAC MA20x75SCA
✅ Corrosion-resistant SUS304 stainless steel mini round pneumatic cylinder (MA series – Double Acting).
✅ Bore: 20 mm.
✅ Stroke: 75 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Rear single-clevis end cap with pivot hole (CA suffix) allows smooth angular oscillation during extension and retraction.
✅ SUS304 stainless steel barrel resists rust and corrosion, paired with lightweight anodized aluminum end caps.
✅ Built-in rubber bumpers at both ends absorb impact noise and ensure smooth, lubrication-free operation.

Technical Specifications
✅ Model: MA20x75SCA (MA20X75SCA)
✅ Series: MA (Stainless Steel Mini Round Cylinder)
✅ Bore: 20 mm
✅ Stroke: 75 mm
✅ Rod diameter: 8 mm (M8×1.25 rod thread)
✅ Action: Double acting
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Back cover type: Single clevis with pivot hole (CA)
✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 800 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/8"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Pivoting lid lifters, conveyor diverter gates, and 75mm-stroke rocker-arm mechanisms utilizing the rear CA clevis mount
✅ Packaging, labeling, filling, food, beverage, and pharmaceutical machinery requiring a clean SUS304 stainless steel barrel
✅ Electronics assembly, textile, printing, and automated equipment requiring magnetic stroke-end sensing
✅ Industrial mechanisms requiring arcuate oscillation between fixed pivot points
Why Choose the AirTAC MA20x75SCA?
The AirTAC MA20x75SCA is a staple in factory automation thanks to its durable SUS304 stainless barrel, versatile CA clevis rear pivot, and built-in magnetic sensing (S). Quiet dual rubber bumpers and lubrication-free operation keep maintenance minimal.
Selection & Installation Tips
✅ Confirm 20mm bore, 75mm stroke, magnetic piston (S), rear clevis cap (CA), and M8×1.25 rod thread match your mechanical linkage.
✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series with BMA20 mounting band) onto the stainless steel barrel.
✅ Fit a properly sized pivot pin through the rear CA clevis eye and install speed controllers on both PT 1/8" ports for smooth speed control.
Hotline: 0084 787900099