AirTAC ACQ16x25B – JIS Standard Compact Square Pneumatic Cylinder Bore 16 × Stroke 25mm
Looking for an ultra-compact JIS standard square pneumatic cylinder with a 16mm bore, 25mm stroke, and a male-threaded piston rod for direct tooling attachment? The AirTAC ACQ16x25B belongs to the standard ACQ series by AirTAC (dimensionally equivalent to SMC CQ2). It features a 16mm bore, 25mm stroke, double-acting operation, a non-magnetic piston, and a male-threaded rod end (B).
Key Features of AirTAC ACQ16x25B
✅ Ultra-slim JIS standard compact square pneumatic cylinder (ACQ series – drop-in dimensional match for SMC CQ2B16-25DM).
✅ Bore: 16 mm (miniature profile ideal for tight machine envelopes).
✅ Stroke: 25 mm.
✅ Action: Double acting.
✅ Non-magnetic piston (standard version; choose AirTAC ACQ16x25SB if magnetic sensor mounting is needed).
✅ Piston rod end: Standard male thread M6×1.0 (B suffix) allows direct mounting of tooling tips, clevises, or lock nuts.
✅ Tie-rodless extruded aluminum body includes through-body mounting holes and a self-lubricating rod bearing.
✅ Built-in rubber bumpers at both ends absorb impact noise and require no additional air line lubrication.

Technical Specifications
✅ Model: ACQ16x25B (ACQ16X25B)
✅ Series: ACQ (JIS Standard Compact Cylinder – Double Acting)
✅ Bore: 16 mm
✅ Stroke: 25 mm
✅ Rod diameter: 8 mm
✅ Rod end type: Male thread M6×1.0 (B suffix)
✅ Action: Double acting
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: No (select S suffix for magnetic piston)
✅ Operating pressure range: 0.1 – 1.0 MPa (14 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5 × 0.8
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ 25mm-stroke miniature part pushing, stopping, clamping, and press-fitting in ultra-compact automation cells
✅ Electronics, PCB handling, semiconductor, optical, and automated medical device assembly
✅ Miniature packaging, labeling, date-coding, and high-speed sorting machinery
✅ Direct dimensional replacement for JIS compact cylinders such as SMC CQ2B16-25DM
Why Choose the AirTAC ACQ16x25B?
The AirTAC ACQ16x25B combines JIS standardized mounting dimensions with a convenient M6×1.0 male-threaded rod in a space-saving 16mm-bore housing. Quiet dual rubber bumpers and lubrication-free operation ensure reliable, low-maintenance performance.
Selection & Installation Tips
✅ Confirm 16mm bore, 25mm stroke, and M6×1.0 male rod thread (B suffix) match your mechanical linkage.
✅ Note that ACQ16x25B is non-magnetic; select AirTAC ACQ16x25SB if magnetic position detection is required.
✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.
✅ Use M5×0.8 fittings equipped with sealing washers and avoid applying radial side loads to the 8mm piston rod.
Hotline: 0084 787900099