AirTAC TACQ25x15S – Guided Anti-Rotation Compact Pneumatic Cylinder Bore 25 × Stroke 15mm
Looking for an ultra-slim JIS standard compact square pneumatic cylinder with a 15mm stroke, built-in anti-rotation guide rods, and a direct-mount front tooling plate? The AirTAC TACQ25x15S belongs to the TACQ series by AirTAC (functionally equivalent to SMC CQ2K). It features a 25mm bore, 15mm stroke, double-acting operation, and a standard integrated magnet (S).
Key Features of AirTAC TACQ25x15S
✅ JIS standard compact pneumatic cylinder with anti-rotation guide rods and front plate (TACQ series).
✅ Bore: 25 mm.
✅ Stroke: 15 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ High anti-rotation precision provided by dual parallel guide rods fixed to a rigid front tooling plate, eliminating angular twist during actuation.
✅ Pre-machined mounting holes on the front plate allow direct attachment of pushers or jigs without external anti-rotation hardware.
✅ Space-saving extruded aluminum body with dual rubber bumpers delivers smooth, lubrication-free operation.

Technical Specifications
✅ Model: TACQ25x15S (TACQ25X15S)
✅ Series: TACQ (JIS Standard Compact Cylinder with Guide Rods & Plate)
✅ Bore: 25 mm
✅ Stroke: 15 mm
✅ Main piston rod diameter: 12 mm
✅ Action: Double acting
✅ Special feature: Anti-rotation guide rods with front mounting plate
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure range: 0.1 – 1.0 MPa (14 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5 × 0.8
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Short-stroke (15mm) pushing, press-fitting, stopping, and lifting mechanisms requiring strict angular alignment
✅ Electronics, PCB handling, semiconductor, and automated medical device assembly machinery
✅ Packaging, labeling, filling, and product sorting lines on automated conveyors
✅ Workpiece clamping fixtures holding oriented parts during machining or inspection
✅ Direct functional replacement for JIS anti-rotation compact cylinders such as SMC CDQ2KB25-15DZ
Why Choose the AirTAC TACQ25x15S?
The AirTAC TACQ25x15S solves piston rod rotation within a slim JIS compact footprint. Its integrated guide rods and direct-mount front plate eliminate external anti-rotation brackets, saving space and improving positioning repeatability.
Selection & Installation Tips
✅ Confirm 25mm bore, 15mm stroke, anti-rotation guided plate design (TACQ), and magnetic piston (S) match your mechanical setup.
✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the integrated body slots for stroke-end sensing.
✅ Note that the TACQ series is engineered primarily for axial anti-rotation; for heavy lateral side loads, consider dedicated slide tables such as AirTAC HLQ or STM series.
Hotline: 0084 787900099