AirTAC P-SAI125-R1 – Pneumatic Cylinder Repair Seal Kit for SAI Series Bore 125mm
Looking for a genuine factory repair seal kit to overhaul and restore full thrust and airtight sealing to your heavy-duty 125mm bore AirTAC SAI series pneumatic cylinder? The AirTAC P-SAI125-R1 is an authentic OEM replacement seal kit engineered specifically for AirTAC SAI series cylinders with a 125mm bore (including SAI125, SAID125, and SAIJ125).
Key Features of AirTAC P-SAI125-R1
✅ Genuine AirTAC OEM repair seal kit tailored for SAI series standard round cylinders with a 125mm bore.
✅ Complete factory-matched sealing set: includes heavy-duty 125mm two-way piston seal, integrated rod/wiper seal, air cushion seals, and end-cap O-rings.
✅ Molded from high-grade NBR and Polyurethane (TPU) elastomers for exceptional wear resistance and long service life under heavy loads.
✅ Restores both pneumatic chamber tightness and adjustable end-of-stroke air cushioning performance.
✅ Highly economical maintenance solution that avoids the high cost of replacing a large 125mm bore actuator assembly.

Technical Specifications
✅ Model: P-SAI125-R1 (PSAI125R1)
✅ Product type: Pneumatic Cylinder Repair Seal Kit
✅ Compatible cylinder series: AirTAC SAI series (SAI125, SAID125, SAIJ125)
✅ Compatible bore size: 125 mm
✅ Seal materials: High-durability NBR / Polyurethane (TPU)
✅ Operating pressure rating: 0.1 – 1.0 MPa
✅ Operating temperature: -20°C ~ +70°C
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Preventive maintenance and full overhaul of heavy-duty AirTAC SAI125 cylinders in pressing, lifting, and bulk-handling lines
✅ Eliminating rod seal leakage, internal piston blow-by, and end-of-stroke cushion loss on 125mm bore cylinders
✅ Critical spare parts inventory for maintenance teams in ceramics, cement, woodworking, packaging, food, and heavy metalworking plants
✅ Restoring factory-grade sealing after barrel cleaning or piston rod replacement on SAI125 actuators
Why Choose the AirTAC P-SAI125-R1?
Replacing an entire 125mm bore cylinder is costly; installing the genuine AirTAC P-SAI125-R1 repair kit restores 100% output force, bubble-tight sealing, and smooth end-of-stroke cushioning at a fraction of the replacement price.
Selection & Installation Tips
✅ Verify that the cylinder nameplate specifies the AirTAC SAI series with a 125mm bore before ordering.
✅ Thoroughly clean all old grease, dirt, and residue from the cylinder barrel and end-cap grooves prior to reassembly.
✅ Lubricate all new seals and cushion rings in the P-SAI125-R1 kit with pneumatic cylinder grease before installation to prevent lip damage.
✅ Re-adjust the cushion needle screws on both end caps and pressure-test at low pressure before returning the cylinder to heavy-duty service.
Hotline: 0084 787900099