Our News & Events

Home / News
AirTAC SE32x100 – Tie-Rodless Standard Pneumatic Cylinder Bore 32mm Stroke 100mm Genuine

AirTAC SE32x100 – Tie-Rodless Standard Pneumatic Cylinder Bore 32mm Stroke 100mm Genuine

Events, Article & Sharing      18/11/2026

AirTAC SE32x100 – Tie-Rodless Standard Pneumatic Cylinder Bore 32 × Stroke 100mm

Looking for a 32mm bore standard pneumatic cylinder with a 100mm stroke, a sleek tie-rodless aluminum barrel for easy cleaning, and adjustable air cushioning? The AirTAC SE32x100 belongs to the SE series by AirTAC. It features a 32mm bore, 100mm stroke, double-acting operation, and a non-magnetic piston.

Key Features of AirTAC SE32x100

✅ Tie-rodless standard square-cover pneumatic cylinder (SE series).

✅ Bore: 32 mm.

✅ Stroke: 100 mm.

✅ Action: Double acting.

✅ Non-magnetic piston (standard version; choose AirTAC SE32x100S if magnetic sensor mounting is needed).

✅ Dual-end adjustable air cushions smoothly decelerate moving payloads and minimize end-of-stroke vibration.

✅ Smooth extruded aluminum barrel eliminates exposed external tie rods, preventing dust accumulation and simplifying washdown.

✅ End-cover mounting dimensions are fully compatible with standard AirTAC SC32 mounting brackets (FA, FB, LB, CA, CB).

Technical Specifications

✅ Model: SE32x100 (SE32X100)

✅ Series: SE (Standard Tie-Rodless Square-Cover Cylinder)

✅ Bore: 32 mm

✅ Stroke: 100 mm

✅ Rod diameter: 12 mm (M10×1.25 rod thread)

✅ Action: Double acting

✅ Cushioning: Adjustable air cushion at both ends

✅ Magnet: No (select S suffix for magnetic piston)

✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)

✅ Proof pressure: 1.5 MPa (215 psi)

✅ Piston speed: 30 – 800 mm/s

✅ Operating temperature: -20°C ~ +70°C

✅ Port size: PT 1/8"

✅ Fluid: Air (filtered by 40μm filter element)

Typical Applications

✅ 100mm-stroke pushing, clamping, lifting, and sorting mechanisms on automated conveyors

✅ Packaging, filling, food, beverage, and pharmaceutical machinery requiring clean, smooth-walled cylinder barrels

✅ Woodworking, textile, printing, converting, and general mechanical assembly lines

✅ Aesthetic drop-in upgrade for standard 32mm bore × 100mm stroke cylinders

Why Choose the AirTAC SE32x100?

The AirTAC SE32x100 combines the proven strength of a 32mm standard actuator with a clean, tie-rodless housing that resists dirt buildup. Tunable dual air cushions and full mounting compatibility with SC32 accessories make installation effortless.

Selection & Installation Tips

✅ Confirm 32mm bore, 100mm stroke, and M10×1.25 rod thread match your mechanical linkage.

✅ Note that SE32x100 is non-magnetic; select AirTAC SE32x100S if magnetic position sensing is required.

✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.

✅ Fine-tune the cushion needle screws on both end caps alongside speed controllers on the PT 1/8" ports for optimal deceleration.

Hotline: 0084 787900099

Social Share

Related Posts

hotline
Working hours: 9:00 - 18:00 (Excluding Saturday and Sunday)
©T Solution industry Vietnam Co., LTD2026. Login