AirTAC MD10x30 – Multi-Mount Mini Pneumatic Cylinder Bore 10 × Stroke 30mm
Looking for an ultra-compact pneumatic cylinder with a 30mm stroke and versatile direct-mounting surfaces that eliminate bulky external brackets? The AirTAC MD10x30 (MD10X30) belongs to the MD multi-mount series by AirTAC. It features a 10mm bore, 30mm stroke, double-acting operation, and a non-magnetic piston.
Key Features of AirTAC MD10x30
✅ Multi-mount mini pneumatic cylinder (MD series – Double Acting).
✅ Bore: 10 mm.
✅ Stroke: 30 mm.
✅ Action: Double acting.
✅ Non-magnetic piston (standard version; choose AirTAC MD10x30S if magnetic sensor mounting is needed).
✅ Machined aluminum body with integrated mounting flats and tapped holes supports direct multi-axis installation in severely tight spaces.
✅ Featherweight, low-inertia moving parts provide crisp response for precision micro-automation.
✅ Built-in rubber bumpers at both ends absorb impact and require no additional air line lubrication.

Technical Specifications
✅ Model: MD10x30 (MD10X30)
✅ Series: MD (Multi-Mount Mini Round Cylinder)
✅ Bore: 10 mm
✅ Stroke: 30 mm
✅ Rod diameter: 4 mm (M4×0.7 rod thread)
✅ Action: Double acting
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: No (select S suffix for magnetic piston)
✅ Operating pressure range: 0.15 – 0.7 MPa (22 ~ 100 psi)
✅ Proof pressure: 1.05 MPa (150 psi)
✅ Operating speed: 30 – 800 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5 × 0.8
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ 30mm-stroke pushing, diverting, stopping, and positioning in electronics and semiconductor assembly
✅ PCB handling, automated medical devices, optical instruments, and precision watchmaking equipment
✅ High-speed miniature packaging, labeling, and filling stations with severely limited space
✅ Compact fixtures requiring direct body mounting in multiple orientations
Why Choose the AirTAC MD10x30?
The AirTAC MD10x30 simplifies fixture design by enabling direct multi-angle mounting without extra brackets. Its compact aluminum construction and bumper-cushioned 30mm travel deliver crisp, repeatable performance in dense automation setups.
Selection & Installation Tips
✅ Confirm 10mm bore, 30mm stroke, and M4×0.7 rod thread match your mechanical layout.
✅ Note that MD10x30 is non-magnetic; select AirTAC MD10x30S if magnetic position detection is required.
✅ Supply clean compressed air filtered to 40μm or finer within the 0.15 – 0.7 MPa operating pressure range.
✅ Use M5×0.8 fittings equipped with sealing washers and avoid applying radial side loads to the 4mm piston rod.
Hotline: 0084 787900099