AirTAC HFR16 – 180-Degree Angular Pneumatic Air Gripper Bore 16mm
Looking for a medium-force pneumatic air gripper with a full 180-degree opening angle so the jaws retract completely clear of surrounding parts? The AirTAC HFR16 belongs to the 180° angular gripper HFR series by AirTAC. It features a 16mm bore, double-acting operation, and a standard integrated magnet for position sensing.
Key Features of AirTAC HFR16
✅ 180-degree wide-opening angular pneumatic air gripper (HFR series).
✅ Bore: 16 mm (delivers stronger gripping torque than the HFR10 for small-to-medium workpieces).
✅ Action: Double acting (pneumatic open and close).
✅ Full 180° jaw opening retracts fingers completely flat to both sides, eliminating clearance interference during pick-and-place cycles.
✅ Precision cam-and-lever mechanism delivers synchronized jaw movement, consistent gripping force, and ±0.05mm repeatability.
✅ Standard built-in magnet and integrated body sensor slots enable effortless open/close status detection.
✅ Lightweight hard-anodized aluminum body operates reliably without air line lubrication.

Technical Specifications
✅ Model: HFR16
✅ Series: HFR (180° Angular Pneumatic Air Gripper)
✅ Bore: 16 mm
✅ Action: Double acting
✅ Opening angle: 180° (full flat retraction)
✅ Closing angle: -3° ~ 0°
✅ Magnet: Yes (built-in standard)
✅ Operating pressure range: 0.15 – 0.7 MPa (22 ~ 100 psi)
✅ Maximum operating frequency: 120 cycles/min
✅ Repeatability: ±0.05 mm
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5 × 0.8
✅ Lubrication: Not required
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Pick-and-place handling stations requiring 180° jaw clearance to avoid colliding with adjacent workpieces
✅ Electronics, semiconductor, precision mechanical, and automated medical device assembly
✅ Automated packaging lines placing items into deep trays or narrow-walled cartons
✅ High-speed delta robots and collaborative robot (cobot) end-of-arm tooling
✅ Functional replacement for 180° angular air grippers such as SMC MHY2-16D
Why Choose the AirTAC HFR16?
The AirTAC HFR16 eliminates jaw-clearance bottlenecks in dense automation cells with its full 180° swing angle while providing solid 16mm-bore clamping force. Offering ±0.05mm repeatability, built-in magnetic sensing, and lubrication-free operation, it boosts cycle speed and reliability.
Selection & Installation Tips
✅ Confirm the HFR16 specification (16mm bore, double-acting) and calculate custom finger length to ensure adequate gripping force during rapid robot motion.
✅ Supply clean compressed air filtered to 40μm or finer within the 0.15 – 0.7 MPa operating pressure range.
✅ Install speed controllers on both M5×0.8 air ports to ensure smooth jaw actuation without internal impact shock.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the body slots to confirm open/closed jaw positions.
Hotline: 0084 787900099