Our News & Events

Home / News
AirTAC MAC40x160SCA – Stainless Steel Air-Cushioned Mini Round Cylinder With Magnet & Clevis Bore 40mm Stroke 160mm Genuine

AirTAC MAC40x160SCA – Stainless Steel Air-Cushioned Mini Round Cylinder With Magnet & Clevis Bore 40mm Stroke 160mm Genuine

Events, Article & Sharing      18/11/2026

AirTAC MAC40x160SCA – Stainless Steel Air-Cushioned Mini Round Cylinder Bore 40 × Stroke 160mm

Looking for a 40mm bore corrosion-resistant stainless steel round pneumatic cylinder with a 160mm stroke, adjustable air cushioning, magnetic sensing, and a rear clevis pivot? The AirTAC MAC40x160SCA belongs to the upgraded MAC series by AirTAC. It features a 40mm bore, 160mm stroke, double-acting operation, adjustable dual-end air cushions, an integrated magnet (S), and a rear single-clevis cap (CA).

Key Features of AirTAC MAC40x160SCA

✅ Stainless steel barrel mini round pneumatic cylinder with adjustable air cushions (MAC series).

✅ Bore: 40 mm (delivers strong linear thrust in a sleek round housing).

✅ Stroke: 160 mm.

✅ Action: Double acting.

✅ Dual-end adjustable air cushions absorb end-of-stroke kinetic energy smoothly, outperforming standard rubber bumpers at higher speeds.

✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.

✅ Rear single-clevis end cap with pivot pin hole (CA suffix) enables smooth angular oscillation during extension and retraction.

✅ Corrosion-resistant SUS304 stainless steel barrel ensures long, lubrication-free service life.

Technical Specifications

✅ Model: MAC40x160SCA (MAC40X160SCA)

✅ Series: MAC (Stainless Steel Mini Round Cylinder with Air Cushion)

✅ Bore: 40 mm

✅ Stroke: 160 mm

✅ Rod diameter: 16 mm (M12×1.25 rod thread)

✅ Action: Double acting

✅ Cushioning: Adjustable air cushion at both ends

✅ Magnet: Yes (S – standard)

✅ Back cover type: Single clevis with pivot hole (CA)

✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)

✅ Proof pressure: 1.5 MPa (215 psi)

✅ Piston speed: 30 – 800 mm/s

✅ Operating temperature: -20°C ~ +70°C

✅ Port size: PT 1/4"

✅ Fluid: Air (filtered by 40μm filter element)

Typical Applications

✅ Pivoting hatch actuators, conveyor diverter gates, and rocker-arm linkages utilizing the rear CA clevis mount

✅ Packaging, filling, food, beverage, and pharmaceutical lines requiring a clean SUS304 stainless steel barrel

✅ Textile, printing, woodworking, and high-speed automation machinery needing smooth air cushioning

✅ Automated systems requiring magnetic stroke-end sensing

Why Choose the AirTAC MAC40x160SCA?

The AirTAC MAC40x160SCA upgrades standard round cylinders with tunable dual-end air cushions, eliminating harsh end-of-stroke noise and vibration over its 160mm travel. Paired with a SUS304 barrel, magnetic piston, and CA clevis rear cap, it excels in dynamic pivoting applications.

Selection & Installation Tips

✅ Confirm 40mm bore, 160mm stroke, adjustable air cushions (MAC), magnetic piston (S), rear clevis (CA), and M12×1.25 rod thread match your linkage.

✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals and cushion needle valves.

✅ Mount compatible magnetic sensors (such as CMSG/DMSG with BMA40 mounting band) onto the stainless steel barrel.

✅ Fine-tune the cushion needle screws on both end caps alongside speed controllers on the PT 1/4" ports for smooth deceleration.

Hotline: 0084 787900099

Social Share

Related Posts

hotline
Working hours: 9:00 - 18:00 (Excluding Saturday and Sunday)
©T Solution industry Vietnam Co., LTD2026. Login