AirTAC 3V2M-NC – 3/2 Way Normally Closed Manifold Pneumatic Solenoid Valve
Looking for a compact, fast-acting 3/2 way normally closed pneumatic solenoid valve engineered specifically for centralized manifold mounting? The AirTAC 3V2M-NC belongs to the 3V200 series by AirTAC. It features a 3-port, 2-position normally closed (NC) configuration, internal pilot actuation, and a manifold-mount body design (M).
Key Features of AirTAC 3V2M-NC
✅ 3-port, 2-position normally closed pneumatic solenoid valve for manifold mounting (3V200 series – 3/2 Way NC).
✅ Mounting style: Manifold mount (M suffix – mounts directly onto 200M or 3V200M manifold bases), consolidating common air supply (P) and exhaust (R) headers.
✅ Actuation method: Internal pilot type provides crisp, low-power switching response.
✅ Precision-machined spool construction delivers tight sealing, up to 5 cycles/second switching frequency, and lubrication-free operation.
✅ Integrated manual override button allows convenient commissioning and troubleshooting without electrical power.
✅ Reliable solenoid coil with standard LED status indicator and surge suppression circuit.

Technical Specifications
✅ Model: 3V2M-NC (3V210-M-NC / 3V2MNC)
✅ Series: 3V200 (3/2 Way Solenoid Valve – Manifold Type)
✅ Valve function: 3 ports, 2 positions, normally closed (3/2 Way NC)
✅ Mounting style: Manifold mount (M suffix)
✅ Actuation method: Internal pilot type
✅ Working outlet port size (A): PT 1/8" or PT 1/4" (depending on station configuration)
✅ Effective flow area: 14.0 mm² (Cv = 0.78)
✅ Operating pressure range: 0.15 – 0.8 MPa (21 ~ 114 psi)
✅ Proof pressure: 1.2 MPa (175 psi)
✅ Maximum operating frequency: 5 cycles/sec
✅ Response time: ≤ 0.05 sec
✅ Operating temperature: -20°C ~ +70°C
✅ Body material: Aluminum alloy
✅ Lubrication: Not required
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Gang-mounted valve clusters on manifold bases inside industrial pneumatic control panels
✅ Controlling single-acting spring-return pneumatic cylinders on packaging, filling, and labeling lines
✅ Supplying pilot air to pneumatic angle seat valves, ball valves, butterfly valves, and air-blow nozzles
✅ Electronics assembly, textile, printing, and automated food processing equipment
✅ Direct replacement or station expansion on AirTAC 200M / 3V200M manifolds
Why Choose the AirTAC 3V2M-NC?
The AirTAC 3V2M-NC streamlines pneumatic piping by uniting common supply and exhaust passages on a single manifold block. With solid flow capacity (Cv = 0.78), sub-0.05s switching response, and rugged spool construction, it delivers reliable performance in dense automation setups.
Selection & Installation Tips
✅ Confirm the 3V2M-NC specification (3/2 way normally closed, manifold mount M) and select the required coil voltage (such as A: AC220V, B: DC24V, C: AC110V, E: DC12V, F: AC24V).
✅ Ensure the base interface gasket is properly seated between the valve bottom and the manifold surface before tightening mounting screws.
✅ Supply clean compressed air filtered to 40μm or finer and maintain at least 0.15 MPa inlet pressure.
✅ Verify spool shifting via the manual override button prior to energizing the solenoid coil.
Hotline: 0084 787900099