AirTAC ESV210M – Compact 5/2 Way Single Solenoid Manifold Valve (ESV200 Series)
Looking for a slim, high-flow 5/2 way single solenoid pneumatic valve engineered specifically for compact manifold mounting? The AirTAC ESV210M belongs to the high-performance ESV200 series by AirTAC. It features a 5-port, 2-position single-solenoid configuration (5/2 Way), internal pilot actuation, and a manifold-mount body design (M).
Key Features of AirTAC ESV210M
✅ Compact 5-port, 2-position single solenoid pneumatic valve for manifold mounting (ESV200 series – 5/2 Way).
✅ Ultra-slim 18mm body width maximizes space efficiency inside high-density pneumatic control cabinets.
✅ High-flow spool architecture delivers a generous 16.0 mm² effective area (Cv = 0.89) for rapid actuation of medium-bore cylinders.
✅ Low-wattage solenoid coil minimizes heat generation and features an integrated LED indicator and surge protection circuit.
✅ Engineered for tens of millions of trouble-free cycles with zero additional air line lubrication required.
✅ Built-in manual override button simplifies system commissioning and troubleshooting without electrical power.
Technical Specifications
✅ Model: ESV210M (ESV210-M)
✅ Series: ESV200 (High-Performance Compact 5/2 Solenoid Valve)
✅ Valve function: 5 ports, 2 positions, single solenoid spring return (5/2 Way)
✅ Mounting style: Manifold mount (M suffix)
✅ Actuation method: Internal pilot type
✅ Effective flow area: 16.0 mm² (Cv = 0.89)
✅ Operating pressure range: 0.15 – 0.8 MPa (21 ~ 114 psi)
✅ Proof pressure: 1.2 MPa (175 psi)
✅ Maximum operating frequency: 5 cycles/sec
✅ Response time: ≤ 0.03 sec
✅ Operating temperature: -20°C ~ +70°C
✅ Body material: Aluminum alloy
✅ Lubrication: Not required
✅ Fluid: Air (filtered by 40μm filter element)

Typical Applications
✅ Gang-mounted valve banks on ESV200M manifolds in high-speed packaging, filling, and labeling lines
✅ Electronics, semiconductor, automotive assembly, textile, and food processing machinery
✅ Centralized pneumatic control cabinets for multi-axis automation cells and industrial robotics
✅ Direct replacement or station expansion on existing AirTAC ESV200 manifold assemblies
Why Choose the AirTAC ESV210M?
The AirTAC ESV210M combines an 18mm slim footprint with high volumetric airflow (Cv = 0.89) and sub-0.03s switching response. Its low power consumption, clean manifold integration, and lubrication-free longevity make it an ideal choice for modern automated machinery.
Selection & Installation Tips
✅ Confirm the ESV210M specification (5/2 way single solenoid, manifold mount M) and select the required coil voltage (such as DC24V or AC220V) and electrical connector style.
✅ Verify compatibility with AirTAC ESV200M manifold bases and ensure the base interface gasket is seated properly before tightening mounting screws.
✅ Supply clean compressed air filtered to 40μm or finer and maintain at least 0.15 MPa inlet pressure for crisp internal pilot shifting.
✅ Test spool actuation using the manual override button prior to energizing the control circuit.
Hotline: 0084 787900099