AirTAC SDAJ25x30-30 – Compact Square Adjustable Stroke Pneumatic Cylinder Bore 25 × Stroke 30mm
Looking for a space-saving compact square pneumatic cylinder that allows full mechanical stroke adjustment across its entire 30mm travel? The AirTAC SDAJ25x30-30 belongs to the SDAJ series by AirTAC. It features a 25mm bore, 30mm base stroke, 30mm stroke adjustment range (-30), double-acting operation, and a non-magnetic piston.
Key Features of AirTAC SDAJ25x30-30
✅ Compact square pneumatic cylinder with rear stroke adjuster (SDAJ series – Adjustable Stroke).
✅ Bore: 25 mm.
✅ Stroke: 30 mm (base stroke).
✅ Adjustable stroke range: 30 mm (allows fine-tuning working travel anywhere from 0mm to 30mm via a locked rear screw).
✅ Action: Double acting.
✅ Non-magnetic piston (standard version; choose AirTAC SDAJ25x30-30S if magnetic sensor mounting is needed).
✅ Piston rod end: Standard female thread M8×1.25 (select B suffix if a male-threaded rod end is required).
✅ Extruded aluminum alloy body, self-lubricating rod bearing, and dual NBR rubber bumpers deliver smooth, lubrication-free operation.

Technical Specifications
✅ Model: SDAJ25x30-30 (SDAJ25X30-30)
✅ Series: SDAJ (Compact Cylinder – Adjustable Stroke)
✅ Bore: 25 mm
✅ Stroke: 30 mm
✅ Adjustable stroke range: 30 mm
✅ Rod diameter: 10 mm
✅ Rod end type: Female thread M8×1.25 (standard)
✅ Action: Double acting
✅ Cushioning: NBR rubber bumper pads at both ends
✅ Magnet: No (select S suffix for magnetic piston)
✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/8"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Component pushing, pressing, stopping, and sorting across multi-format product lines requiring 0–30mm stop adjustments
✅ Packaging, labeling, filling, electronics assembly, and precision machining equipment
✅ Adjustable clamping jigs accommodating varying workpiece thicknesses in machining and welding
✅ Space-restricted automation cells requiring accurate mechanical stroke limiting
Why Choose the AirTAC SDAJ25x30-30?
The AirTAC SDAJ25x30-30 combines the compact square body of the SDA series with a full 30mm rear stroke adjuster, allowing fast, exact stop-position calibration without reworking mounting brackets. Its dual rubber bumpers and lubrication-free bearing design ensure dependable performance.
Selection & Installation Tips
✅ Confirm 25mm bore, 30mm base stroke, 30mm adjustment range (-30), and standard M8×1.25 female rod thread (or select AirTAC SDAJ25x30-30B for a male rod thread).
✅ Note that SDAJ25x30-30 is non-magnetic; select AirTAC SDAJ25x30-30S if magnetic position sensing is required.
✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.
✅ Loosen the rear lock nut, rotate the adjustment screw to set the desired working stroke (within 30mm), and re-tighten the lock nut securely.
Hotline: 0084 787900099