AirTAC 2LA250-25 – Stainless Steel Pneumatic Angle Seat Valve PT 1" Port (DN25)
Looking for a high-flow stainless steel pneumatic angle seat valve engineered to handle saturated steam, hot water, corrosive chemicals, or viscous fluids? The AirTAC 2LA250-25 belongs to the heavy-duty 2L angle seat valve series by AirTAC. It features a 25.0mm orifice, PT 1" (DN25) threaded ports, a corrosion-resistant stainless steel body, and a normally closed single-acting pneumatic actuator.
Key Features of AirTAC 2LA250-25
✅ 2/2 way normally closed pneumatically actuated angle seat valve (2L series – NC).
✅ Large orifice diameter: 25.0 mm (250); Y-pattern angled body boosts flow capacity by up to 30% over conventional globe valves and prevents water hammer.
✅ Port connection size: PT 1" (25 / DN25).
✅ Corrosion-resistant SUS304 / SUS316 stainless steel valve body suitable for harsh chemicals and sanitary industrial lines.
✅ High-temperature PTFE (Teflon) valve plug seal rated up to +180°C provides bubble-tight shutoff for steam, hot water, oils, and solvents.
✅ 360°-rotatable pneumatic actuator head with visual open/closed position indicator simplifies piping and status inspection.

Technical Specifications
✅ Model: 2LA250-25 (2LA25025)
✅ Series: 2L (Pneumatic Operated Angle Seat Valve)
✅ Valve function: 2 ports, 2 positions, normally closed spring return (2/2 Way NC)
✅ Actuation method: Single-acting pneumatic piston actuator
✅ Orifice diameter: 25.0 mm (DN25 – Cv = 19.0)
✅ Main port size: PT 1"
✅ Pilot air port size: PT 1/8"
✅ Body material: Stainless steel SUS304 / SUS316
✅ Seat seal material: High-temperature PTFE (Teflon)
✅ Working fluid pressure: 0 – 1.6 MPa (0 ~ 16 bar)
✅ Pilot control air pressure: 0.3 – 0.8 MPa (3 ~ 8 bar)
✅ Fluid temperature range: -10°C ~ +180°C
✅ Compatible media: Saturated steam, hot/cold water, compressed air, oils, alcohol, solvents, and viscous fluids (up to 600 CST)
Typical Applications
✅ Steam boilers, autoclaves, commercial laundry equipment, and industrial heat-exchanger lines
✅ Food, beverage, dairy, brewing, and pharmaceutical filling lines requiring stainless steel wetted parts
✅ Water treatment skids, chemical dosing manifolds, textile dyeing, and plastic molding machinery
✅ High-flow or high-viscosity fluid shutoff (oils, adhesives, syrups) where standard solenoid valves fail
Why Choose the AirTAC 2LA250-25?
The AirTAC 2LA250-25 isolates the pneumatic actuator completely from hot or corrosive media while delivering exceptional flow rates through its 25mm Y-body orifice. Rated up to 180°C with a durable PTFE seat and million-cycle actuator life, it offers unmatched reliability for demanding process pipelines.
Selection & Installation Tips
✅ Confirm the 2LA250-25 specification (25mm orifice, PT 1" ports, normally closed) and pair with a 3/2 way solenoid pilot valve (such as AirTAC 3V1-06 or 3V210-08) to switch control air.
✅ Maintain pilot air pressure between 0.3 and 0.8 MPa to ensure full valve opening against line pressure.
✅ Install the valve with flow entering beneath the valve plug (against closing spring direction) to eliminate water hammer upon rapid shutoff.
✅ Fit an upstream Y-strainer to prevent scale or weld slag from scoring the PTFE seat.
Hotline: 0084 787900099