AirTAC HRQ20 – Pneumatic Rotary Table Actuator Bore 20mm Adjustable 0–190°
Looking for a precision pneumatic rotary table actuator capable of supporting direct table payloads with an adjustable 0° to 190° rotation angle? The AirTAC HRQ20 belongs to the HRQ rotary table series by AirTAC. It features a 20mm bore, a dual-piston double rack-and-pinion mechanism, and a standard built-in magnet for position sensing.
Key Features of AirTAC HRQ20
✅ High-load precision pneumatic rotary table actuator (HRQ series).
✅ Bore: 20 mm (dual-piston design delivers balanced, high rotational torque).
✅ Double rack-and-pinion drive mechanism eliminates backlash for accurate, repeatable angular positioning.
✅ Integrated large-diameter table bearing allows direct payload mounting with minimal runout and high moment rigidity.
✅ Adjustable rotation angle from 0° to 190° via built-in angle-adjusting screws with lock nuts.
✅ Standard built-in magnet and integrated body sensor slots enable reliable end-of-rotation feedback.
Technical Specifications
✅ Model: HRQ20
✅ Series: HRQ (Pneumatic Rotary Table Actuator)
✅ Bore: 20 mm (Dual piston)
✅ Drive mechanism: Double rack and pinion
✅ Adjustable angle range: 0° ~ 190°
✅ Maximum rotation angle: 190°
✅ Cushioning: Rubber bumper pads at both ends (optional hydraulic shock absorbers supported)
✅ Magnet: Yes (built-in standard)
✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Rotation time (90°): 0.2 – 1.0 sec/90°
✅ Operating temperature: -10°C ~ +60°C
✅ Port size: M5 × 0.8 (side and bottom piping ports available)
✅ Fluid: Air (filtered by 40μm filter element)

Typical Applications
✅ 90° or 180° part flipping, orientation indexing, and rotary transfer stations on automated assembly lines
✅ Electronics, semiconductor, PCB handling, and automated optical inspection (AOI) indexing tables
✅ Pick-and-place end-of-arm tooling requiring part rotation prior to tray loading
✅ Labeling, date-coding, filling, and compact packaging machinery
✅ Direct functional and dimensional replacement for pneumatic rotary tables such as SMC MSQB20A
Why Choose the AirTAC HRQ20?
The AirTAC HRQ20 combines a zero-backlash double rack-and-pinion drive with a rigid integrated table bearing, allowing direct payload attachment without external support bearings. Its 0°–190° angle adjustability and standard magnetic sensor grooves simplify setup and precision control.
Selection & Installation Tips
✅ Confirm the HRQ20 specification (20mm bore) and verify that payload inertia and moment loads stay within HRQ20 ratings.
✅ Supply clean compressed air filtered to 40μm or finer within the 0.15 – 1.0 MPa operating pressure range.
✅ Loosen the lock nuts on the angle-adjusting screws to set the exact stopping angles (0° to 190°), then re-tighten securely.
✅ Install speed controllers on both M5×0.8 ports to control rotational deceleration smoothly and mount compatible magnetic sensors (such as CMSG/DMSG) in the body slots.
Hotline: 0084 787900099