AirTAC SAI80x200SG – Anti-Rotation Round Pneumatic Cylinder Bore 80 × Stroke 200mm
Looking for a heavy-duty 80mm bore round pneumatic cylinder with a 200mm stroke, built-in rod anti-rotation guidance, and adjustable air cushioning? The AirTAC SAI80x200SG belongs to the SAI series by AirTAC. It features an 80mm bore, 200mm stroke, double-acting operation, a standard integrated magnet (S), and an internal anti-rotation guide mechanism (SG).
Key Features of AirTAC SAI80x200SG
✅ Standard round-barrel pneumatic cylinder with built-in anti-rotation guide (SAI series).
✅ Bore: 80 mm (delivers high pushing and pulling force for heavy loads).
✅ Stroke: 200 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Integrated anti-rotation guide mechanism (SG) prevents piston rod rotation throughout the 200mm stroke.
✅ Adjustable air cushions on both end covers ensure smooth deceleration of heavy payloads.
✅ Sleek tie-rodless aluminum alloy barrel resists dirt accumulation and simplifies maintenance.

Technical Specifications
✅ Model: SAI80x200SG (SAI80X200SG)
✅ Series: SAI (Standard Round Cylinder with Anti-Rotation Guide)
✅ Bore: 80 mm
✅ Stroke: 200 mm
✅ Rod diameter: 25 mm (M20×1.5 rod thread)
✅ Action: Double acting
✅ Special feature: Integrated anti-rotation guide (SG)
✅ Cushioning: Adjustable air cushion at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 3/8"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Heavy-duty lifting, pressing, and sorting mechanisms over a 200mm stroke requiring strict angular alignment
✅ Carton packaging, filling, food, beverage, and converting machinery
✅ Woodworking, textile, printing, and heavy industrial clamping fixtures
✅ Automated lines requiring accurate magnetic stroke-end sensing
Why Choose the AirTAC SAI80x200SG?
The AirTAC SAI80x200SG pairs the high output thrust of an 80mm bore with a dedicated SG anti-rotation mechanism, eliminating angular drift without bulky external guide rods. Dual adjustable air cushions and a standard magnetic piston ensure smooth, reliable performance.
Selection & Installation Tips
✅ Confirm 80mm bore, 200mm stroke, magnetic piston (S), anti-rotation guide (SG), and M20×1.5 rod thread match your mechanical setup.
✅ Supply clean compressed air filtered to 40μm or finer with sufficient flow capacity for the PT 3/8" ports.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series with BSI80 mounting band) onto the round barrel.
✅ Fine-tune the cushion needle screws on both end caps according to load inertia for smooth stopping.
Hotline: 0084 787900099