AirTAC SAUJ100x100-30N – Square Profile Adjustable Stroke Pneumatic Cylinder Bore 100 × Stroke 100mm
Looking for a heavy-duty 100mm bore pneumatic cylinder with a sleek tie-rodless square profile and fine mechanical stroke adjustment? The AirTAC SAUJ100x100-30N belongs to the SAUJ series by AirTAC. It features a 100mm bore, 100mm base stroke, 30mm stroke adjustment range (-30), double-acting operation, and a non-magnetic piston (N).
Key Features of AirTAC SAUJ100x100-30N
✅ Square-profile tie-rodless standard pneumatic cylinder with rear stroke adjuster (SAUJ series).
✅ Bore: 100 mm (generates substantial pushing and pressing force for heavy-duty applications).
✅ Stroke: 100 mm (base stroke).
✅ Adjustable stroke range: 30 mm (allows fine-tuning working travel between 70mm and 100mm via a locked rear screw).
✅ Action: Double acting.
✅ Non-magnetic piston (N standard version; select AirTAC SAUJ100x100-30S if magnetic sensor mounting is needed).
✅ Dual-end adjustable air cushions smoothly decelerate heavy moving payloads at stroke ends.
✅ Extruded square aluminum barrel eliminates external tie rods, preventing dust accumulation and simplifying washdown.

Technical Specifications
✅ Model: SAUJ100x100-30N (SAUJ100X100-30N)
✅ Series: SAUJ (Square Profile Standard Cylinder – Adjustable Stroke)
✅ Bore: 100 mm
✅ Stroke: 100 mm
✅ Adjustable stroke range: 30 mm
✅ Rod diameter: 25 mm (M20×1.5 rod thread)
✅ Action: Double acting
✅ Cushioning: Adjustable air cushion at both ends
✅ Magnet: No (N suffix)
✅ Operating pressure range: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/2"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Pneumatic presses, forming dies, balers, and heat-sealing stations requiring precise depth stop control
✅ Carton packaging, filling, and automated palletizing lines handling multiple product dimensions
✅ Heavy workpiece clamping fixtures in metalworking, woodworking, and building materials manufacturing
✅ Food and beverage machinery requiring smooth tie-rodless barrels for easy cleaning
Why Choose the AirTAC SAUJ100x100-30N?
The AirTAC SAUJ100x100-30N combines the high output force of a 100mm bore with a clean square-profile housing and a 30mm rear stroke adjuster. Dual adjustable air cushions protect heavy tooling from end-of-stroke shock, while its lubrication-free bearing design ensures long service life.
Selection & Installation Tips
✅ Confirm 100mm bore, 100mm base stroke, 30mm adjustment range (-30), non-magnetic piston (N), and M20×1.5 rod thread match your application.
✅ Supply clean compressed air filtered to 40μm or finer with adequate flow capacity for the PT 1/2" ports.
✅ Loosen the rear lock nut, turn the adjustment screw to set the desired working stroke (within 30mm), and re-tighten the lock nut securely.
✅ Fine-tune the cushion needle screws on both end caps according to load inertia for smooth deceleration.
Hotline: 0084 787900099