AirTAC ACQ40x30SB – Compact Square Pneumatic Cylinder Bore 40 × Stroke 30mm
Looking for a high-thrust JIS standard compact square pneumatic cylinder with built-in magnetic sensing and a male-threaded rod end? The AirTAC ACQ40x30SB belongs to the standard ACQ series by AirTAC. It features a 40mm bore, 30mm stroke, double-acting operation, an integrated magnet (S), and a male-threaded piston rod (B).
Key Features of AirTAC ACQ40x30SB
✅ JIS standard compact square pneumatic cylinder (ACQ series – functionally equivalent to SMC CQ2 series).
✅ Bore: 40 mm (generates strong pushing and clamping force in a space-saving square profile).
✅ Stroke: 30 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Piston rod end: Standard male thread M14×1.5 (B suffix) allows direct mounting of clevis joints, floating joints, or lock nuts.
✅ Tie-rodless extruded aluminum alloy body includes flush sensor mounting grooves and a self-lubricating rod bearing.

Technical Specifications
✅ Model: ACQ40x30SB (ACQ40X30SB)
✅ Series: ACQ (JIS Standard Compact Cylinder – Double Acting)
✅ Bore: 40 mm
✅ Stroke: 30 mm
✅ Rod diameter: 16 mm
✅ Rod end type: Male thread M14×1.5 (B suffix)
✅ Action: Double acting
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure range: 0.1 – 1.0 MPa (14 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/8"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Workpiece clamping, press-fitting, light stamping, and conveyor stopping mechanisms
✅ Packaging, filling, labeling, food, and beverage production lines
✅ Precision machining jigs, automated welding fixtures, and automotive or electronics assembly stations
✅ Space-restricted machinery requiring high output force from a 40mm bore
✅ Direct functional replacement for JIS standard compact cylinders such as SMC CDQ2B40-30DM
Why Choose the AirTAC ACQ40x30SB?
The AirTAC ACQ40x30SB combines an ultra-slim JIS standardized square body with a sturdy 16mm male-threaded rod (M14×1.5) and standard magnetic piston. Dual rubber bumpers soften end-of-stroke impact, while its lubrication-free bearing design keeps maintenance minimal.
Selection & Installation Tips
✅ Confirm 40mm bore, 30mm stroke, magnetic piston (S), and M14×1.5 male rod thread (B) match your mechanical linkage.
✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the integrated barrel slots.
✅ Use PT 1/8" pneumatic fittings for the air ports and avoid radial side loads on the piston rod.
Hotline: 0084 787900099