AirTAC 6SV110-06 – Compact 5/2 Way Single Solenoid Pneumatic Valve PT 1/8" Port
Looking for a slim, fast-acting 5/2 way single solenoid pneumatic valve designed to maximize space efficiency in dense automation panels? The AirTAC 6SV110-06 belongs to the compact 6SV100 series by AirTAC. It features a 5-port, 2-position single-solenoid configuration (5/2 Way), internal pilot actuation, and standard PT 1/8" ports.
Key Features of AirTAC 6SV110-06
✅ Compact 5-port, 2-position single solenoid pneumatic valve (6SV100 series – 5/2 Way).
✅ Port connection size (P, A, B, R, S): PT 1/8" (06).
✅ Ultra-slim 15mm body width dramatically reduces installation footprint when gang-mounted on manifolds.
✅ Low-wattage solenoid coil minimizes heat generation and includes an LED status indicator and surge suppression circuit.
✅ Precision spool design delivers ultra-fast switching under 0.03 seconds, tight sealing, and lubrication-free longevity.
✅ Integrated manual override button simplifies commissioning and troubleshooting without electrical power.

Technical Specifications
✅ Model: 6SV110-06 (6SV11006)
✅ Series: 6SV100 (Compact 5/2 Way Solenoid Valve)
✅ Valve function: 5 ports, 2 positions, single solenoid (5/2 Way)
✅ Actuation method: Internal pilot type
✅ Port size (P, A, B, R, S): PT 1/8"
✅ Effective flow area: 12.0 mm² (Cv = 0.67)
✅ Operating pressure range: 0.15 – 0.8 MPa (21 ~ 114 psi)
✅ Proof pressure: 1.2 MPa (175 psi)
✅ Maximum operating frequency: 5 cycles/sec
✅ Response time: ≤ 0.03 sec
✅ Operating temperature: -20°C ~ +70°C
✅ Body material: Aluminum alloy
✅ Lubrication: Not required
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Controlling small- to medium-bore double-acting pneumatic cylinders on high-speed assembly lines
✅ Electronics, semiconductor, PCB handling, optical, and automated medical device machinery
✅ Packaging, filling, labeling, textile, and printing equipment requiring compact valve clusters
✅ Centralized manifold mounting (6SV100M series) inside space-constrained control cabinets
✅ High-density pneumatic automation panels demanding low power draw and rapid cycle rates
Why Choose the AirTAC 6SV110-06?
The AirTAC 6SV110-06 pairs a space-saving 15mm slim body with strong flow capacity (Cv = 0.67) and sub-0.03s switching response. Its low power consumption and high mechanical endurance ensure dependable performance in continuous industrial duty.
Selection & Installation Tips
✅ Confirm the 6SV110-06 specification (5/2 way single solenoid, PT 1/8" ports) and select the required coil voltage (typically DC24V or AC220V) and connector type.
✅ Supply clean compressed air filtered to 40μm or finer and maintain at least 0.15 MPa inlet pressure.
✅ Connect ports properly: P (air supply), A and B (cylinder ports), and R and S (exhaust—recommended to fit PT 1/8" silencers).
✅ When mounting multiple valves on a 6SV100M manifold base, verify that all interface gaskets are seated properly before tightening mounting screws.
Hotline: 0084 787900099